MSD
![Thumbnail](https://threepedals.com/wp-content/uploads/2019/03/logo_msdwhitebkg-square.jpg)
Image | Name | Summary | Price | Buy | Categories | hf:categories |
---|---|---|---|---|---|---|
MSD Atomic EFI AirForce Intake Manifold Gen V LT1 | Performance, polymer intake manifold for GM LT1 engines. The MSD Atomic AirForce intake manifold delivers improved airflow and distribution to improve the performance of stock and modified engines. The unique bell-mouthed runner entrances maximize airflow and minimize shrouding – all while optimizing the available plenum volume for an unobstructed flow path over opposing runners. The polymer molded 2-piece design allows for easy access to the runners for porting. The Atomic AirForce LT1 manifold accepts OEM Drive-By-Wire (DBW) and aftermarket Big-Bore DBW throttle bodies – as well as cable operated throttle bodies. Auxiliary fuel rails and port injectors may also be fitted for applications where the capacity of the stock Gasoline Direct Injection (GDI) system has been exceeded. The intake is supplied with new OEM-style bolts, but the use of new OEM-style intake port seals is required.
Features:
More on MSD Atomic AirForce Manifolds Installation Note: Use of aftermarket rails may require the use of customer-supplied spacers and hardware. | Intake Manifolds | intake-manifold intake engine | |||
MSD Distributor; GM LT-1 5.7L; 93-94 | Distributors | distributors ignition | ||||
MSD '94-97 GM LT1 5.7L Distributor | Leave it to MSD to build an all-out performance distributor to replace the OEM GM LT1 Optispark! We machine an entire billet block of aluminum down into a precise housing that fits in place of the factory piece. Then, we fill it with a reliable new pick-up assembly, a trick timing adjustment mechanism and top it off with an all new MSD distributor cap! The pick-up is an advanced optical encoder, a different style of optical pickup than the OEM. This type of pick-up has proven to be very reliable and stable through extreme rpm and conditions. The rotor is bolted to a drive assembly that is indexed to the shaft and is stabilized through the use of a large ball bearing assembly. Once installed, you have the ability to adjust the ignition timing – the only distributor that offers timing adjustability! An adjustment screw allows the timing to be tweaked up to +/-5°. The distributor is equipped with a fresh air vent and has an extra thick mounting surface for the cap to eliminate leaks. The distributor is supplied complete with our heavy duty LT1 Cap, Rotor and the components required for installation.
Features:
| Distributors | distributors ignition | |||
MSD Coils; GM 98-06 (LS1/6); 8-Pack | Ignition Coil | ignition-coil ignition | ||||
MSD Coils; 5.7L HEMI; 03-05; 8-Pack | Ignition Coil | ignition-coil ignition | ||||
MSD Coils; GM LS Truck 99-07; 8-Pack | Ignition Coil | ignition-coil ignition | ||||
MSD Coils; Street Fire; GM 98-06 (LS-1/6); 8-Pack | Ignition Coil | ignition-coil ignition | ||||
MSD Coils; Street Fire; GM L-Series Truck 99-07; 8-Pack | Ignition Coil | ignition-coil ignition | ||||
MSD Coils; Street Fire; 5.7/6.1L HEMI; 05-14; 8-Pack | Ignition Coil | ignition-coil ignition | ||||
MSD Super Conductor 8.5mm Wire; 100 Bulk | Spark Plug Wire Cut to Length | spark-plug-wire plugs-and-wires ignition | ||||
MSD Super Conductor Wire; Black; 100 Bulk | Spark Plug Wire Cut to Length | spark-plug-wire plugs-and-wires ignition | ||||
MSD Digital Soft Touch HEI Rev Limiter | Ignition Control Module | ignition-control-module ignition | ||||
MSD Wire Set; Super Conductor; Universal Chevy; LT1 with 90 boots | $240.00 | Spark Plug Wire Set | spark-plug-wire-set plugs-and-wires ignition | |||
MSD LT-1 Distributor Cap and Rotor Kit; GM; LT-1; 350/5.7L SFI; 95-97 | Distributors | distributors ignition | ||||
MSD LT-1 Distributor Cap and Rotor Kit; GM; LT-1; 350/5.7L SFI; 93-94 | Distributors | distributors ignition | ||||
MSD Wire Set; Red Super Conductor; Gen III LS-1/6 V8; Universal | Spark Plug Wire Set | spark-plug-wire-set plugs-and-wires ignition | ||||
MSD Super Conductor Spark Plug Wire Set '94 - '96 Impala LT1 - Red | MSD Super Conductor red spark plug wire set, fits ’94 – ’96 B-Body including Chevy Impala, Chevy Caprice, Buick Roadmaster, and Cadillac Fleetwood. Fits 5.7L LT1 and 4.3L. Also available in black. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is only 40 – 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) “choke”. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSD’s 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps; one for the sleeve of the wire and another separate crimp to grasp the conductor. The MSD’s 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps; one for the sleeve of the wire and another separate crimp to grasp the conductor. Features:
| Spark Plug Wire Set | spark-plug-wire-set plugs-and-wires ignition | |||
MSD Wire Set; Super Conductor; Black; Universal LS-Series; Remote Coils | Spark Plug Wire Set | spark-plug-wire-set plugs-and-wires ignition | ||||
MSD Wire Set; Super Conductor; Chevy Corvette; LT1; V8; 92-97 | Spark Plug Wire Set | spark-plug-wire-set plugs-and-wires ignition | ||||
MSD Black Solid State High Current Relays | High-Current Solid-State Relay 35 Amp per channel up to 140 Amp continuous
Clean up your wiring with an MSD Solid-State High Current Relay Block. This high current module takes the place of 4 standard relays and eliminates unsightly wiring. Four independent channels can be activated using either power or ground. Each channel is capable of handling up to 35 Amps of continuous current, providing up to 140 Amps of power. It also has the capability of Pulse Width Modulation (PWM). With a PWM input, you can control the output at a rate of 15 hertz and a duty cycle of 50-90%. Controls electric fans, water pumps, nitrous solenoids, auxiliary lighting and any other electrical accessories that would normally require a relay. LED status indicators ensure proper wiring and operation of each channel. Should a problem arise, the relay block has built-in automatic over-temp, short circuit, and overload protection, as well as a channel reset. The solid-state high current relay can easily be mounted using the supplied hardware and mounting tabs that can be rotated 90° to accommodate various mounting locations. It’s compact and clean design will make your wiring project a breeze.
Features:
| Relays | relays electrical | |||
MSD Red Solid State High Current Relays | High-Current Solid-State Relay 35 Amp per channel up to 140 Amp continuous
Clean up your wiring with an MSD Solid-State High Current Relay Block. This high current module takes the place of 4 standard relays and eliminates unsightly wiring. Four independent channels can be activated using either power or ground. Each channel is capable of handling up to 35 Amps of continuous current, providing up to 140 Amps of power. It also has the capability of Pulse Width Modulation (PWM). With a PWM input, you can control the output at a rate of 15 hertz and a duty cycle of 50-90%. Controls electric fans, water pumps, nitrous solenoids, auxiliary lighting and any other electrical accessories that would normally require a relay. LED status indicators ensure proper wiring and operation of each channel. Should a problem arise, the relay block has built-in automatic over-temp, short circuit, and overload protection, as well as a channel reset. The solid-state high current relay can easily be mounted using the supplied hardware and mounting tabs that can be rotated 90° to accommodate various mounting locations. It’s compact and clean design will make your wiring project a breeze.
Features:
| Relays | relays electrical | |||
MSD Wire Set; Super Conductor; Universal Chevy; LT1 with straight boot | Spark Plug Wire Set | spark-plug-wire-set plugs-and-wires ignition | ||||
MSD Black Solid State Relay 4 Channel | Clean up your wiring with an MSD Solid State Relay Block. This module takes the place of 4 standard relays and eliminates unsightly wiring. 4 independent channels can be activated using either power or ground. Each channel is capable of handling 50 Amps for up to 8 seconds or 20 Amps of continuous current. With 4 channels providing up to 200 Amps of momentary or 80 Amps constant combined power, you can easily control electric fans, water pumps, nitrous solenoids, auxiliary lighting and any other electrical accessories that would normally require a relay. LED status indicators ensure proper wiring and operation of each channel. Should a problem arise, the relay block has built-in automatic over-temp, short circuit and overload protection. The 7564 can easily be mounted using the supplied hardware and mounting tabs that can be rotated 90° to accommodate various mounting locations. It’s compact and clean design will make your wiring project a breeze.
Features:
| Relays | relays electrical | |||
MSD Red Solid State Relay 4 Channel | Clean up your wiring with an MSD Solid State Relay Block. This module takes the place of 4 standard relays and eliminates unsightly wiring. 4 independent channels can be activated using either power or ground. Each channel is capable of handling 50 Amps for up to 8 seconds or 20 Amps of continuous current. With 4 channels providing up to 200 Amps of momentary or 80 Amps constant combined power, you can easily control electric fans, water pumps, nitrous solenoids, auxiliary lighting and any other electrical accessories that would normally require a relay. LED status indicators ensure proper wiring and operation of each channel. Should a problem arise, the relay block has built-in automatic over-temp, short circuit and overload protection. The 7564 can easily be mounted using the supplied hardware and mounting tabs that can be rotated 90° to accommodate various mounting locations. It’s compact and clean design will make your wiring project a breeze.
Features:
| CC/Malibu Build, Relays | cc-malibu-build relays custom-builds electrical | |||
MSD Wire Set; Black Super Conductor; LT1 Camaro; 93-96 | Spark Plug Wire Set | spark-plug-wire-set plugs-and-wires ignition | ||||
MSD Wire Set; Super Conductor; LT1 Camaro; 93-96 | Spark Plug Wire Set | spark-plug-wire-set plugs-and-wires ignition | ||||
MSD RED SUPER CONDUCTOR GEN III LS-1/6 V8, UNIVERSAL | OPEN BOX PRICING VALID FOR THIS ONE OPEN BOX ITEM ONLY Routing spark plug wires is an art form. It takes patience and time to route your wires away from the headers, through separators and to the distributor cap. Some wire sets fit perfect, but a lot of people want to build their own so they can route them exactly how they see fit. Our Universal spark plug wire sets come with the spark plug terminal and boot installed with the other end open. Distributor cap boots and terminals are included so you can cut the wire to the desired length, then install the terminal with the supplied Mini-Stripper-Crimper. It’s a little more work, but in the end it will be worth it. Features: | Clearance Items, Open Box Items | clearance open-box | |||
MSD Wire Set; Black Super Conductor; Chevy Caprice/Camaro; 88-on | Spark Plug Wire Set | spark-plug-wire-set plugs-and-wires ignition | ||||
MSD Wire Set; Black Super Conductor; Chevy Corvette; LT1; 92-97 | Spark Plug Wire Set | spark-plug-wire-set plugs-and-wires ignition | ||||
MSD Wire Set; Black Super Conductor; LS-1 Truck Engines; 99-on | Spark Plug Wire Set | spark-plug-wire-set plugs-and-wires ignition | ||||
MSD Super Conductor '99 LS-1 Truck Engines Wire Set | For use on 1999 LS1 Truck Engines, Red jacket Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is only 40 – 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) “choke”. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSD’s 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps; one for the sleeve of the wire and another separate crimp to grasp the conductor. The MSD’s 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps; one for the sleeve of the wire and another separate crimp to grasp the conductor.
Features:
| Spark Plug Wire Set | spark-plug-wire-set plugs-and-wires ignition | |||
MSD Wire Set; Black Super Conductor; GM LS1; Vette; Camaro; 97-on | Spark Plug Wire Set | spark-plug-wire-set plugs-and-wires ignition | ||||
MSD Super Conductor GM LS1 Corvette/Camaro '97-on Wire Set | For use on GM LS1 engines, Corvette, Camaro, ’97-On, Red jacket Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is only 40 – 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) “choke”. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSD’s 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps; one for the sleeve of the wire and another separate crimp to grasp the conductor. The MSD’s 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps; one for the sleeve of the wire and another separate crimp to grasp the conductor.
Features:
| Spark Plug Wire Set | spark-plug-wire-set plugs-and-wires ignition | |||
MSD Wire Set; Street Fire; Chevy LT1; Impala/Caprice; 94-96 | $110.00 | Spark Plug Wire Set | spark-plug-wire-set plugs-and-wires ignition | |||
MSD Super Conductor 8.5mm Wire; 25 Bulk | Spark Plug Wire Cut to Length | spark-plug-wire plugs-and-wires ignition | ||||
MSD Ignition Coil '96-'97 GM LT1 - Red | Used on 1996-1999 GM vehicles.
Features:
| Ignition Coil | ignition-coil ignition | |||
MSD Wire Set; Street Fire; Chevy LT1; Camaro 93-96 | Spark Plug Wire Set | spark-plug-wire-set plugs-and-wires ignition | ||||
MSD Wire Set; Street Fire; GM LS1; LS6; 97-On; Vette; Camaro | Spark Plug Wire Set | spark-plug-wire-set plugs-and-wires ignition | ||||
MSD Pro-Clamp Wire Separators | Spark Plug Wire Separator | spark-plug-wire-separator plugs-and-wires ignition | ||||
MSD Super Conductor Wire; Black; 6 Bulk | Spark Plug Wire Cut to Length | spark-plug-wire plugs-and-wires ignition | ||||
MSD Plug Wire Spacer Kit 16 per Set | Spark Plug Wire Separator | spark-plug-wire-separator plugs-and-wires ignition |
Interesting links
Here are some interesting links for you! Enjoy your stay :)Pages
- 2012 Dodge Charger SRT8
- Big Brake Kits
- Clutch Play
- Factory Seconds
- G-Body Electric Sensor Options
- GM B-Body / Impala SS Kit
- Launch
- My Rides
- Our Builds
- Shaken & Stirred Build Products
- Shift Knobs
- Shop
- SSubtle Take Build Products
- Wholesale Login
- Wholesale Store
- 1989 Pontiac Safari
- Add Ride
- Dakota Digital HDX Instrument System Specifications
- Master Automotive Technician
- Pedals
- 24 Karat Olds
- Dakota Digital RTX Instrument System Specifications
- GM A/G-Body Kit
- Merch
- Press
- 2015 Ford Mustang GT
- Bellhousings
- Dakota Digital VHX Instrument System Specifications
- Military Discount
- 2007 BMW 328xi
- Chrysler LX / Dodge Charger Kit
- Clutches
- Dakota Digital VFD Instrument System Specifications
- Clutch Fluid Reservoirs and Brackets
- Ford Panther / Crown Vic Kit
- Jobs
- 1995 Caprice 9C1 6 Speed
- Clutch Hydraulics Packages
- 1977 Mercedes 6.9
- Clutch Master Cylinders
- 1977 Toyota FJ40
- Clutch Pedal Electronics
- Dakota Digital Instrument Clusters
- Pedals & Drivetrain Swaps
- Three Pedals #14
- 1988 Cutlass
- Driveshafts
- Trucks
- 1995 Chevrolet Impala SS
- Flywheels
- New Products
- Hydraulic Release Bearings
- SSubtle Take
- T56 Teardown
- 1961 Impala
- Pilot Bearings and Bushings
- Reverse Lockout
- Welcome to Three Pedals!
- Shift Levers & Shift Knobs
- Car API
- Transmissions
- Events
- Transmission Crossmembers
- 1996 Impala Console
- Transmission Install Packages
- Transmission Mounts
- G-Body Request a Quote
- Tremec TKX 5 Speed Transmission
- Request a Quote
- Shaken & Stirred
- Transmission Tunnels
- Clearance Items
- Car Craft Malibu
- Car Craft Malibu Build Products
- Conversion Kits
- Products
- Shop Online
- Rides Gallery
- About Us
- Services
- Blog
- Contact
- Info
- Cart
- Shipping & Returns
- Privacy Policy
- Terms of Use
- Checkout
- My Account
- Vehicle Search
- Cart
Categories
- 1961 Impala
- 1973 Oldsmobile Cutlass
- 1977 Mercedes 6.9
- 1977 Toyota FJ40
- 1988 Cutlass
- 1989 Pontiac Safari
- 1991 Jeep Wrangler
- 1992 Land Rover D90
- 1995 Caprice 9C1 6 Speed
- 1995 Chevrolet Impala SS
- 1996 Impala Gen V LT1
- 2007 BMW 328xi
- 2012 Dodge Charger SRT8
- 2015 Chevy SS
- 2015 Mustang GT
- 2017 Jeep Rubicon Recon Unlimited
- 2017 Toyota Tacoma
- 499HP Caprice
- About Press
- Blog
- CC/Malibu
- CC/Malibu Blog
- CC/Malibu Video
- FAQ
- Press
- Projects
- Shaken Blog
- Shaken Cool Kids
- Shaken Press
- Shaken Video
- T56 Teardown
- Technical
- Three Pedals #14
- Three Pedals #16