- Sort by Popularity (sales)
- Display 30 Products per page
Image | Name | Summary | Price | Buy | Categories | hf:categories |
---|---|---|---|---|---|---|
GM OEM Neutral Safety Switch | GM OEM Neutral Safety Switch When adding a clutch pedal to your vehicle we strongly recommend including a neutral safety switch. When wired in properly, this prevents the engine starter from engaging unless the clutch pedal is depressed. There’s a reason the word “safety” is in the name! We offer a package with the correct wiring harness and the correct gauge of wire, click here. | Neutral Safety | neutral-safety pedal-switch-harness electrical | |||
GM OEM Neutral Safety Switch Harness | GM OEM neutral safety switch wiring harness. Includes two 12 gauge wire heat shrink butt connectors. | $24.99 | Electrical, Neutral Safety | electrical neutral-safety pedal-switch-harness | ||
Upgraded Pinion Yoke Seal For GM 10 Bolt | The factory pinion yoke seal is known to leak, and to address this GM introduced an improved yoke and seal, with an extra sealing lip. When upgrading to the new and improved design, a new yoke and corresponding seal are required. Fits 8.5″ GM 10 bolt passenger car axles, for other applications please confirm fitment. Timken 710506 is an equivalent alternative and may be substituted for this part number at the same price. | $16.99 | Pinion Yoke | pinion-yoke rear-axle | ||
GM OEM Flywheel Bolts | GM OEM flywheel bolts, sold individually. 6 are required. | Flywheel Bolt Set | flywheel-bolt flywheel | |||
GM '98-'02 F-Body LS Hydraulic Throwout Bearing | GM ’98-’02 F-Body LS Hydraulic Throwout Bearing is a factory replacement piece that works well with the Tremec Magnum and Magnum-F 6 speed manual transmissions. The quick connect fitting is easy to connect to a high pressure hose. For -4AN choose Earl’s LS0024ERL. For bleeding the hydraulic line we very much recommend a remote bleeder kit, and Earl’s PK0008ERL makes the perfect combo. We always recommend checking bearing clearance before installing your transmission. Generally an initial gap between 1/8″ and 3/16″ works well. If you have too large a gap you can shim your bearing to reduce the gap. Shims are available in three thicknesses – click here. Clearance Measurement Instructions
| $174.99 | Hydraulic Release Bearing | hydraulic-release-bearing clutch-hydraulics clutch | ||
GM Rubber Brake and Clutch Pedal Cover for 2010 - 2015 Chevy Camaro | Rubber clutch and brake pedal pad cover, used on 2010+ Camaro and other applications. Sold individually. Shown pictured on our 1991 – 1996 GM B-Body clutch and brake pedal assembly. | Clutch and Brake Pedal Pads, Pedals & Drivetrain Swaps, Shaken and Stirred Build | clutch-brake-pedal-pad pedals-drivetrain-swaps shaken-build pedals hot-products custom-builds | |||
GM OEM Clutch Position Sensor Harness CAN bus | GM OEM clutch position sensor harness for CAN bus | $19.99 | Pedal Position | pedal-position pedal-switch-harness electrical | ||
GM OEM Cruise Control System-Release Switch Retainer | GM OEM Cruise Control System-Release Switch Retainer | $9.99 | Electrical | electrical | ||
GM Aluminum Bellhousing - LS and LT Engines to T56 | GM Aluminum Bellhousing – LS and LT Engines to T56 | $329.99 | Bellhousing - LS to LS, T56 Bellhousing | bellhousing-ls-ls t56-bellhousing conversion-package bellhousings | ||
GM OEM Pedal Position Sensor CAN Bus | GM OEM Pedal Position Sensor for CAN bus systems
| $16.99 | Pedal Position | pedal-position pedal-switch-harness electrical | ||
Outer axle bearing for 8.5" 10 bolt rear (Sedan) | Outer axle bearing for 8.5″ 10 bolt rear (Sedan) – two required | Outer Axle Bearings and Seals | outer-axle-bearing-seal rear-axle | |||
Outer axle seal for 8.5" 10 bolt (Sedan), sold individually, 2 required per vehicle | Outer axle seal for 8.5″ 10 bolt (Sedan), sold individually, 2 required per vehicle | $15.49 | Outer Axle Bearings and Seals | outer-axle-bearing-seal rear-axle | ||
Reverse Lockout Harness for T56 and TR6060 | GM OEM T56 reverse lockout wiring harness. Fits the Tremec T56, T56 Magnum, and TR6060 6 speed manual transmissions. | Electrical, Pedals & Drivetrain Swaps, Reverse Lockout | electrical pedals-drivetrain-swaps reverse-lockout hot-products transmission-install | |||
GM OEM Speedometer Wiring Harness | GM OEM speedometer wiring harness. | $33.80 | Electrical | electrical | ||
GM Bellhousing Dowel Pin | GM dowel pin, inserts into engine block and locates transmission bellhousing. 5/8″ Diameter. Sold individually, two needed per engine. | $6.99 | Dowel Pins | dowel-pin bellhousings | ||
GM Driveshaft Strap Bolts - 1350 U-Joint | GM Driveshaft Strap Bolts – 1350 U-Joint | $2.99 | U-Joints and Straps | u-joints-straps driveline | ||
LS (Gen III, Gen IV) or LT (Gen V) | $0.00 | Packages - Engine | packages-engine | |||
Small Block Chevy | $0.00 | Packages - Engine | packages-engine | |||
Big Block Chevy | Big Block Chevy Engine | $0.00 | Packages - Engine | packages-engine | ||
GM OEM Heated Oxygen Sensor | ACDelco oxygen sensors are the ideal high-quality replacements for your vehicle. They are special feedback sensors installed in vehicle exhaust systems to measure the proportion of oxygen in the exhaust gases. Using this measurement, the engine management computer can adjust the air/fuel ratio near the optimum value of 14.7:1. At this ratio, engine performance, emissions, and fuel economy are all optimized. These premium replacement oxygen sensors arThie manufactured to meet or exceed your expectations for fit, form, and function. Features and benefits include: * Detects oxygen content in the exhaust gases to optimize emissions and fuel economy Brand:ACDelco UPC:808709374077 | $51.99 | Sensors | sensors electrical | ||
Connector - GM | Multi Purpose Wire Connector Brand: ACDelco | 1996 Gen V LT1 Build, Electrical, Electrical Connectors | 1996-gen-v-lt1-build electrical electrical-connectors custom-builds | |||
Fuel Pressure Sensor - GM | GM Fuel Pressure Sensor | Sensors | sensors electrical | |||
OEM GM Outer axle bearing for 8.5″ 10 bolt rear (Wagon) | OEM GM Outer axle bearing for 8.5″ 10 bolt rear (Wagon) | $29.00 | Outer Axle Bearings and Seals, Shaken and Stirred Build | outer-axle-bearing-seal shaken-build rear-axle custom-builds | ||
OEM GM Outer axle seal for 8.5″ 10 bolt (Wagon) | OEM GM Outer axle seal for 8.5″ 10 bolt (Wagon) | $7.28 | Outer Axle Bearings and Seals, Shaken and Stirred Build | outer-axle-bearing-seal shaken-build rear-axle custom-builds | ||
GM OEM Fuel Filter and Regulator for LS Engines | This fuel filter has a built in regulator and is perfect for returnless fuel line plumbing on LS engine swaps running at 58 psi. Originally designed for Corvettes, we regularly use this for LS retrofits. This unit has a 3/8″ inlet, 3/8″ outlet to the fuel rail, and a 5/16″ outlet for the return line to the tank. For -6AN adapters: 3/8″ Inlet This is not for supercharged applications. Cross reference to AC Delco pn GF822 | $89.99 | Fuel Pressure Regulators | fuel-pressure-regulator fuel | ||
Roller pilot bearing | Roller pilot bearing | $15.12 | Clutch Pilot Bushing / Bearing | clutch-pilot-bushing-bearing clutch-components clutch |