- Display 45 Products per page
Magnum
| Image | Name | Summary | Price | Buy |
|---|---|---|---|---|
 | '78-'88 A/G-Body Tremec T56 and T56 Magnum Transmission Installation Package | ’78-’88 A/G-Body Tremec T56 and T56 Magnum Transmission Installation Package | From: $0.00 | |
| '94-'96 B-Body Tremec T56 Magnum Transmission Installation Package - LS 6 Bolt Flywheel | ’94-’96 B-Body Tremec T56 Magnum Transmission Installation Package – LS 6 Bolt Flywheel | From: Original price was: $606.85.$604.43Current price is: $604.43. | |
| '94-'96 B-Body Tremec T56 Magnum Transmission Installation Package - LS 8 Bolt Flywheel | ’94-’96 B-Body Tremec T56 Magnum Transmission Installation Package – LS 8 Bolt Flywheel | From: Original price was: $636.14.$622.43Current price is: $622.43. | |
| '94-'96 B-Body Tremec T56 Magnum Transmission Installation Package - Orig LT1 | ’94-’96 B-Body Tremec T56 Magnum Transmission Installation Package – Orig LT1 | From: Original price was: $581.86.$579.44Current price is: $579.44. | |
 | 1964-65 GTO, Le Mans, Cutlass, 442 Convertible T56 Magnum Swap Kit for LS Engine | Original price was: $2,774.91.$2,663.11Current price is: $2,663.11. | ||
 | 1964-66 Chevelle, Malibu T56 Magnum Swap Kit for LS Engine | Original price was: $2,769.91.$2,658.11Current price is: $2,658.11. | ||
 | 1964-66 Pontiac GTO, Le Mans, Cutlass, 442 T56 Magnum Swap Kit for LS Engine | Original price was: $2,774.91.$2,663.11Current price is: $2,663.11. | ||
 | 1966 Chevelle, Malibu Convertible and El Camino T56 Magnum Swap Kit for LS Engine | Original price was: $2,769.91.$2,658.11Current price is: $2,658.11. | ||
 | 1966 GTO, Le Mans, Cutlass, 442 Convertible T56 Magnum Swap Kit for LS Engine | Original price was: $2,774.91.$2,663.11Current price is: $2,663.11. | ||
 | 1967 Camaro, Firebird T56 Magnum Swap Kit for LS Engine | Original price was: $3,019.46.$2,918.66Current price is: $2,918.66. | ||
 | 1967 Chevelle, Malibu Convertible and El Camino T56 Magnum Swap Kit for LS Engine | Original price was: $2,765.91.$2,668.11Current price is: $2,668.11. | ||
 | 1967 Chevelle, Malibu T56 Magnum Swap Kit for LS Engine | Original price was: $2,765.91.$2,668.11Current price is: $2,668.11. | ||
 | 1967 GTO Le Mans Cutlass T56 Magnum Swap Kit for LS Engine | Original price was: $2,770.91.$2,673.11Current price is: $2,673.11. | ||
 | 1967 GTO, Le Mans, Cutlass, 442 Convertible T56 Magnum Swap Kit for LS Engine | Original price was: $2,770.91.$2,673.11Current price is: $2,673.11. | ||
 | 1968 Camaro, Firebird T56 Magnum Swap Kit for LS Engine | Original price was: $3,019.46.$2,918.66Current price is: $2,918.66. | ||
 | 1968-1974 Nova, Ventura T56 Magnum Swap Kit for LS Engine | Original price was: $3,022.46.$2,922.66Current price is: $2,922.66. | ||
 | 1968-72 Cutlass, 442 Convertible T56 Magnum Swap Kit for LS Engine | Original price was: $2,802.91.$2,706.11Current price is: $2,706.11. | ||
 | 1968-72 Chevelle, Malibu Convertible and El Camino T56 Magnum Swap Kit for LS Engine | Original price was: $2,747.91.$2,651.11Current price is: $2,651.11. | ||
 | 1968-72 Chevelle, Malibu T56 Magnum Swap Kit for LS Engine | Original price was: $2,747.91.$2,651.11Current price is: $2,651.11. | ||
 | 1968-72 Cutlass 442 T56 Magnum Swap Kit for LS Engine | Original price was: $2,802.91.$2,706.11Current price is: $2,706.11. | ||
 | 1968-72 GTO, Le Mans, GS Convertible T56 Magnum Swap Kit for LS Engine | Original price was: $2,802.91.$2,706.11Current price is: $2,706.11. | ||
 | 1968-72 GTO, Le Mans, GS Convertible T56 Magnum Swap Kit for LS Engine | Original price was: $2,802.91.$2,706.11Current price is: $2,706.11. | ||
 | 1969 Camaro, Firebird T56 Magnum Swap Kit for LS Engine | Original price was: $3,034.46.$2,933.66Current price is: $2,933.66. | ||
 | 1996 Impala SS Console Insert - Damaged (B) | THIS CONSOLE CONTAINS IMPERFECTIONS AS DESCRIBED BELOW; PRICE IS DISCOUNTED ACCORDINGLY; PLEASE VIEW ALL PHOTOS Imperfections in this console: Depression behind boot *** Our console insert provides a factory-like appearance to finish off the interior of your Impala SS with a manual transmission. A leather shift boot is included. To install, simply remove the trim around the console and remove the automatic shifter surround. There is some minor trimming of your console to be done, underneath the auto shifter surround, following our instructions. Our insert fits perfectly, and replacing the trim secures it in place. The shift boot opening is designed to fit an LT1 T56 from a ’94 – ’97 F-Body. If you have a T56 Magnum we sell a shift lever relocation spacer that moves your lever back to work perfectly with our insert. | Original price was: $399.00.$299.00Current price is: $299.00. | |
 | 1996 Impala SS Console Insert - Damaged (C) | THIS CONSOLE CONTAINS IMPERFECTIONS AS DESCRIBED BELOW; PRICE IS DISCOUNTED ACCORDINGLY; PLEASE VIEW ALL PHOTOS Imperfections in this console: Ripples along driver side of boot *** Our console insert provides a factory-like appearance to finish off the interior of your Impala SS with a manual transmission. A leather shift boot is included. To install, simply remove the trim around the console and remove the automatic shifter surround. There is some minor trimming of your console to be done, underneath the auto shifter surround, following our instructions. Our insert fits perfectly, and replacing the trim secures it in place. The shift boot opening is designed to fit an LT1 T56 from a ’94 – ’97 F-Body. If you have a T56 Magnum we sell a shift lever relocation spacer that moves your lever back to work perfectly with our insert. | Original price was: $399.00.$319.00Current price is: $319.00. | |
 | 1996 Impala SS Console Insert - Damaged (D) | THIS CONSOLE CONTAINS IMPERFECTIONS AS DESCRIBED BELOW; PRICE IS DISCOUNTED ACCORDINGLY; PLEASE VIEW ALL PHOTOS Imperfections in this console: Flat spot behind boot; ripples along both sides of boot *** Our console insert provides a factory-like appearance to finish off the interior of your Impala SS with a manual transmission. A leather shift boot is included. To install, simply remove the trim around the console and remove the automatic shifter surround. There is some minor trimming of your console to be done, underneath the auto shifter surround, following our instructions. Our insert fits perfectly, and replacing the trim secures it in place. The shift boot opening is designed to fit an LT1 T56 from a ’94 – ’97 F-Body. If you have a T56 Magnum we sell a shift lever relocation spacer that moves your lever back to work perfectly with our insert. | Original price was: $399.00.$269.00Current price is: $269.00. | |
 | 1996 Impala SS Console Insert - Damaged (E) | THIS CONSOLE CONTAINS IMPERFECTIONS AS DESCRIBED BELOW; PRICE IS DISCOUNTED ACCORDINGLY; PLEASE VIEW ALL PHOTOS Imperfections in this console: Depression behind boot; ripples along both sides of boot *** Our console insert provides a factory-like appearance to finish off the interior of your Impala SS with a manual transmission. A leather shift boot is included. To install, simply remove the trim around the console and remove the automatic shifter surround. There is some minor trimming of your console to be done, underneath the auto shifter surround, following our instructions. Our insert fits perfectly, and replacing the trim secures it in place. The shift boot opening is designed to fit an LT1 T56 from a ’94 – ’97 F-Body. If you have a T56 Magnum we sell a shift lever relocation spacer that moves your lever back to work perfectly with our insert. | Original price was: $399.00.$249.00Current price is: $249.00. | |
 | 1996 Impala SS Manual Transmission Console Insert | October 2022 update: We are currently backordered on this part, with more to be available in late November. We do have several consoles in stock that each have one or more imperfections, click here to view them. Our console insert provides a factory-like appearance to finish off the interior of your Impala SS with a manual transmission. A leather shift boot is included. To install, simply remove the trim around the console and remove the automatic shifter surround. The shift boot opening is designed to fit an LT1 T56 from a ’94 – ’97 F-Body. If you have a T56 Magnum we sell a shift lever relocation spacer that moves your lever back to work perfectly with our insert. | $399.00 | |
 | 64-65 Chevelle, Malibu Convertible and El Camino T56 Magnum Swap Kit for LS Engine | Original price was: $2,774.91.$2,663.11Current price is: $2,663.11. | ||
 | Bellhousing for LS T56 to small or big block Chevy engine | Bellhousing for LS T56 to small or big block Chevy engine Note: This bellhousing is currently out of stock. We have an alternative by Quick Draw Brand in stock – click here. The Quick Time RM-6023 bellhousing connects a small block and big block Chevy engines to a T56 LS-1 Chevy, T-56 Magnum or T-56 Magnum XL transmission. This bellhousing is S.F.I. 6.1 certified which is required by many sanctioning bodies for cars running 11.49 or faster in the quarter mile. This bellhousing is a universal fit bellhousing and is not vehicle specific. The Quick Time bellhousings are produced using a unique spin forming process which results in a very high strength material. This high material strength allows the Quick Time bellhousings to be light weight while maintaining the protection you desire. Note: (Transmission Mounting Bolts Not Included) Features:
| Original price was: $1,078.00.$969.95Current price is: $969.95. | |
 | BMR 3rd Gen F-Body T56 Torque Arm Relo Crossmember - Black | The OE torque arm mounts to the tailshaft housing of the transmission. For factory horsepower levels and average street driving this works fine, but drag racing combined with more power equals broken tailshaft housings. BMR Torque Arm Relocation Crossmembers allow you to take the torque arm mount off the transmission and onto the crossmember, eliminating the chance of breakage and firming up the mounting point. Additionally, these crossmembers allow the user to fine tune the launch characteristics of the car by offering multiple mounting points for “instant center” height adjustments. Bolts to OE frame points using existing mounting holes. – This SKU is black hammertone powdercoat, also available in red powdercoat Fits: 1984 – 1992 Chevrolet Camaro 1984 – 1992 Pontiac Firebird | $259.95 | |
 | BMR 3rd Gen F-Body T56 Torque Arm Relo Crossmember - Red | The OE torque arm mounts to the tailshaft housing of the transmission. For factory horsepower levels and average street driving this works fine, but drag racing combined with more power equals broken tailshaft housings. BMR Torque Arm Relocation Crossmembers allow you to take the torque arm mount off the transmission and onto the crossmember, eliminating the chance of breakage and firming up the mounting point. Additionally, these crossmembers allow the user to fine tune the launch characteristics of the car by offering multiple mounting points for “instant center” height adjustments. Bolts to OE frame points using existing mounting holes. – This SKU is red powdercoat, also available in black hammertone Fits: 1984 – 1992 Chevrolet Camaro 1984 – 1992 Pontiac Firebird | $259.95 | |
 | Bowler 10" Kickback Billet Shift Lever - "The Razor" Black Anodized with Machined Edges | This shifter was created and designed for the Tremec customer. Now you have the option to upgrade your interior with this sleek shift lever and knob. Combine this lever with one of our bezels and knobs for the complete package, and the perfect fit for your Tremec transmission. Also fits the LGT 700. Features:
Dimensions and Options:
| $94.00 | |
 | Bowler 10" Kickback Billet Shift Lever - Black Anodized | This shifter was created and designed for the Tremec customer. Now you have the option to upgrade your interior with this sleek shift lever and knob. Combine this lever with one of our bezels and knobs for the complete package, and the perfect fit for your Tremec transmission. Also fits the LGT 700. Features:
Dimensions and Options:
| $103.40 | |
 | Bowler 10" Kickback Billet Shift Lever - Raw Machined | This shifter was created and designed for the Tremec customer. Now you have the option to upgrade your interior with this sleek shift lever and knob. Combine this lever with one of our bezels and knobs for the complete package, and the perfect fit for your Tremec transmission. Also fits the LGT 700. Features:
Dimensions and Options:
| $103.40 | |
 | Bowler 8" Kickback Billet Shift Lever - Black | The perfect fit for your Tremec transmission. This shifter was created and designed for the Tremec customer. Now you have the option to upgrade your interior with this sleek shift lever and knob. Also fits the LGT 700. Features:
Dimensions and Options
| $103.40 | |
 | Bowler 8" Kickback Billet Shift Lever - Raw Machined | The perfect fit for your Tremec transmission. This shifter was created and designed for the Tremec customer. Now you have the option to upgrade your interior with this sleek shift lever and knob. Also fits the LGT 700. Features:
Dimensions and Options
| $103.40 | |
 | Bowler T56 Magnum All-in-One Harness with Reverse Lockout | For T56 Magnum, Magnum XL, & Mustang GT500 TR6060Other versions available:
The T56, T56 Magnum, and TR6060 transmissions come equipped with 3 electronic connections that control the vehicle speedometer output, reverse lock out, and reverse lights. If you are using the T56 Magnum in conjunction with a GM connect and cruise package or utilizing an electronic speedometer from companies such as: Classic Instruments, Auto Meter, or Dakota Digital you will will be able to program the outputs to the needed pulse count as well as control the parameters of the reverse lock out all from the Bluetooth enabled smart phone app. The All-in-One harness solution for the T56 transmission comes equipped with all the connections pre-wired into one harness for a simple installation and ease of use. The small epoxy sealed controller is mounted to the VSS output using the existing bolt, and once the unit is powered up you will be able to connect via Bluetooth to your Apple or Android smartphone using our free app. The app will give you the ability to customize the input and output settings for each feature to ensure proper operation in your vehicle. The All-in-One harness eliminates the need for any additional equipment to operate the reverse lock out or generate the correct speedometer signals coming from your T56. This All-in-One harness solution is the perfect finishing touch for any T56 conversion, and the only harness you will ever need. Prior to the development of the All-in-One harness you would need up to 5 separate parts to perform all the same functions wrapped up in this one harness solution. Getting the correct speed sensor output and operating the reverse lock out are typically the most frustrating and confusing. The more technology we incorporate into our hot rods these days sometimes requires specific input signals to allow everything to function correctly. There may be scenarios where you are using a speedometer that requires one signal and an ECM that requires a completely different signal. With the 2 speed outputs that are available in the All-in-One harness you can independently control the output of each one further eliminating any need for additional equipment and connections. The reverse lock out on the T56 is another commonly misunderstood feature. The reverse lock out is a solenoid controlled pin, that uses a spring to exert pressure against the shift rail, to help prevent an accidental shift into reverse when going into 5th gear. It doesn’t prohibit reverse engagement, it only makes it difficult to shift into reverse when it is not getting a power signal. Once power is applied, the solenoid pulls the pin back allowing reverse engagement with minimal effort. The OE’s control this feature using a speed setting to dictate when the pin is pulled rather than a momentary on/off signal. We’ve incorporated that same speed setting feature into the All-in-One harness to give you better control over when the lock out is triggered. The T56 All-in-One Harness utilizes a small, built in, epoxy sealed box that will control each of the 3 functions with power and grounding for each function through a switched +12v circuit and a wire connected to the negative battery post or engine block. Control of the reverse lockout solenoid is based on a user defined speed setting (Default is set at locked above 4 MPH and unlocked at 0-3 MPH) This eliminates the need for a separate lock out control box which is currently the only option to activate the reverse lock out correctly. It is common for most folks to just simply connect their lock out solenoid to a momentary on/off switch such as the brake light switch to activate. This method will get the job done, but can over work the solenoid, and over time shorten its life span. For your electronic speedometer, the harness is equipped with 2 speed sensor outputs; the speed sensor outputs generate a square wave signal that goes from about -5 to roughly +5 volts, varying in frequency as the speed changes. But, you say, my ECM input needs a positive only signal. No problem! The output will automatically shift and give you 0 to +10 volts. The 2 speed sensor outputs are completely independent and can be calibrated separately with any pulse count and ratio you want. So, these two outputs should pretty much be able to drive any common speedometer, cruise control, or ECM. This will give you much greater flexibility in the components you are able to use and requires less time wiring everything up. The reverse lights are powered by a single output wire connected to the positive side of your reverse lights; grounding of those lights should be local to the bulb socket. There is no easier solution for setting up your T56 transmission! T56 Reverse Lock Out Module Vehicle Speed Sensor with Dual Output, pre-set as GM 40 pulse output on one and 16 pulse output on the other. This function can be adjusted with your iOS or Android device. Includes wiring for reverse lights, reverse lock-out and vehicle speed sensor. | $325.60 | |
 | Driveline Components Direct Mount Short Throw Shifter for T56 Magnum Front Mount | This shifter fits the case mounted location of the T56 Magnum front shifter location. This shifter is “straight up” meaning the shift lever mounts directly over the shift cup. We also offer this shifter with lateral and forwards or backwards offsets to fit your vehicle just right. Shift lever not included. This uses a common two-bolt mount, with 7/8″ spacing between the bolts.
| $330.00 | |
 | Driveline Components Short Throw Shifter for Magnum in '64-'67 Chevelle with Stops | Tremec T56 Magnum shifter for 1964-1967 Chevrolet Chevelle, 1963-1967 Chevy II and Nova, and 1968-1974 Chevy Nova This shifter replaces the stock Magnum shifter and is oriented with the shifter in the front position (front of the rear socket) and is offset perfectly to fit the exact location of the factory 4 speed console. We offer multiple offsets, please contact us with your needs. Shifter includes adjustable shift stops which we recommend with any lever longer than 8″. Shift lever not included – for ’64-’67 Chevelle this Hurst lever will be perfect. This uses a common two-bolt mount, with 7/8″ spacing between the bolts. We have many different sizes available to suit your needs. Similar but different shifter pictured | $394.00 | |
| Driveline Components Short Throw Shifter for Magnum in '64-'67 Chevelle, Others | Tremec T56 Magnum shifter for 1964-1967 Chevrolet Chevelle, 1963-1967 Chevy II and Nova, and 1968-1974 Chevy Nova This shifter replaces the stock Magnum shifter and is oriented with the shifter in the front position (front of the rear socket) and is offset perfectly to fit the exact location of the factory 4 speed console. We offer multiple offsets, please contact us with your needs. Shift lever not included – for ’64-’67 Chevelle this Hurst lever will be perfect. This uses a common two-bolt mount, with 7/8″ spacing between the bolts. We have many different sizes available to suit your needs. Similar but different shifter pictured | $360.00 | |
| Driveline Components T56 Magnum Short Throw Shifter with 2.15" Rear Offset | This shifter fits the Tremec T56 Magnum in the rear shifter position. The shift lever stub is offset 2.15″ rearward when mounted in the rear socket, and 2.15″ forward when mounted in the other direction in the front socket. Shift lever not included. This uses a common two-bolt mount, with 7/8″ spacing between the bolts. Pictured shifter is by the same manufacturer but is a different part number
| $330.00 | |
| Driveline Components T56 Magnum Short Throw Shifter with Stops | This shifter fits the rear 6 bolt socket of the T56 Magnum transmission. This is a short throw shifter, providing shorter and more direct shifts as compared to the stock Tremec shifter. This shifter includes positive stops, which are best for racing applications or shift levers longer than 10″. This shifter is “straight up” meaning the shift lever mounts directly over the shift cup. We also offer this shifter with lateral and forwards or backwards offsets to fit your vehicle just right. Shift lever not included. This uses a common two-bolt mount, with 7/8″ spacing between the bolts. Photos are of a similar shifter | $380.00 | |
 | Forged Slip Yoke - fits Tremec Magnum and Others with 1350 U-Joint | T56 Magnum Slip Yoke with bolt-on caps for 1350 u-joint. Forged 4140 Chromoly for ultimate strength. Fits multiple transmissions including most T56, FMX, C6, Tremec, and ZF 5-speed transmissions.
| $194.99 | |
 | GM '98-'02 F-Body LS Hydraulic Throwout Bearing | GM ’98-’02 F-Body LS Hydraulic Throwout Bearing is a factory replacement piece that works well with the Tremec Magnum and Magnum-F 6 speed manual transmissions. The quick connect fitting is easy to connect to a high pressure hose. For -4AN choose Earl’s LS0024ERL. For bleeding the hydraulic line we very much recommend a remote bleeder kit, and Earl’s PK0008ERL makes the perfect combo. We always recommend checking bearing clearance before installing your transmission. Generally an initial gap between 1/8″ and 3/16″ works well. If you have too large a gap you can shim your bearing to reduce the gap. Shims are available in three thicknesses – click here. Clearance Measurement Instructions
| $174.99 | |
 | GM Aluminum Bellhousing - LS and LT Engines to T56 | GM Aluminum Bellhousing – LS and LT Engines to T56 | $499.99 | |
 | Holley Concentric Clutch Slave Cylinder Throwout Bearing Assembly | 1998-2002 Camaro / Firebird with T-56 Transmission, 2004-2006 Pontiac GTO Clutch slave cylinder for LS1 & LS6 F-Body (1998-2002 Camaro and Firebird) vehicles. It is highly recommended that the clutch slave cylinder be replaced any time the clutch is replaced. Clutch slave cylinder can also be used for 2004-2006 GTO. (You must swap the original fittings from your stock slave cylinder to this unit.)
The quick connect fitting is easy to connect to a high pressure hose. For -4AN choose Earl’s LS0024ERL. For bleeding the hydraulic line we very much recommend a remote bleeder kit, and Earl’s PK0008ERL makes the perfect combo. We always recommend checking bearing clearance before installing your transmission. Generally an initial gap between 1/8″ and 3/16″ works well. If you have too large a gap you can shim your bearing to reduce the gap. Shims are available in three thicknesses – click here.
Features:
| Original price was: $208.00.$186.95Current price is: $186.95. | |
 | Hooker 1st Gen F-Body T56 Transmission Crossmember, X-Body | For 1967-69 GM F-Body and 1968-74 GM X-Body with Small Block and Big Block Chevrolet Engines converting to GM T-56 and T-56 Magnum Transmissions
Unlock the full potential of your F-Body or X-Body by combining it with a T-56 6-speed (GM 4th Gen F-Body or GTO versions) or T-56 Magnum Transmission. Road trips on the highway will no longer be lacking conversation due to high-rpm drone and stopping at every gas station will become a thing of the past.
This Hooker Blackheart Crossmember is constructed with high-quality materials, including heavy-duty steel, to provide maximum strength and durability. The crossmember is engineered to improve the overall performance of your Camaro by reducing flex and increasing the rigidity of the transmission mount. A transmission swap may sound daunting, but due to the superior design and resulting ease of installation, you’ll be back on the road in no time. Supporting Products: Transmission Mount Isolator PN 71223029HKR (black) or 71223030HKR (red) Hurst Universal Tunnel Patch PN 69510000
Features:
| Original price was: $413.00.$370.95Current price is: $370.95. | |
 | Hooker BlackHeart G-Body LS Swap Trans Crossmember for Auto and T56 | 1978-88 GM A/G-Body LS swap 4L60//4L65/4L70/4L80/TH400/2004R/T56/T56 Magnum Transmission Crossmember Features:
NOTEIntegral component of the complete Hooker BlackHeart swap system for this application. Component features unique geometry that is not compatible for use with any other brand of engine mounting components. 4L60/4L65/4L70 applications require add on bracket P/N 12655HKR. 4L80 applications require add-on bracket P/N 12656HKR. For applications that were NOT originally equipped with a 200-4R transmission, crossmember adapter P/N 12647HKR is required. Crossmember fitment has not been validated for El Camino applications. | Original price was: $380.00.$341.95Current price is: $341.95. | |
 | Hooker T56 Adapter for 1988-2000 C1500 Trucks | 1988-2000 Chevrolet C1500 LS/LT Swap Transmission Adapter Bracket – T-56 or T-56 Magnum Hooker BlackHeart has quickly become the leader in LS and LT engine swaps and we are excited to announce new products for 1988-2000 GM C1500 Trucks/SUVs (GMT400 or “OBS”). This transmission crossmember adapter is designed to allow the use of a Tremec T-56 or T-56 Magnum transmission along with Hooker BlackHeart Engine Swap Mount Brackets (choose between P/N: BHS552 (LS), BHS553 (LT), or deluxe brackets BHS554 (LS/LT rear-biased position). Utilizing the factory 1988-2000 C1500 700RW/4L60/4L60E transmission crossmember, driveshaft, and engine isolator mounts will complete the list of items that will result in a trouble-free install. Of course, don’t forget Hooker Blackheart 71223029HKR (black) or 71223030HKR (red) transmission mounts as well to replace a tired factory piece.
If utilizing drive-by-wire (DBW) functionality, see Holley #145-113 DBW Accelerator Pedal Bracket that allows the use of Holley #145-160 DBW Accelerator Pedal to easily bolt in the perfect location.
Features:
| Original price was: $91.94.$82.75Current price is: $82.75. | |
 | Hurst 1955-1957 Chevy Manual Transmission Crossmember for T56, TKX | These ultra-trick Hurst transmission cross-members have painstakingly been designed and fabricated from thick steel plate and heavy gauge steel tubing for a perfect fit and finish that has no equal. These bolt-in units are much stronger than the factory stock cross-members and help maintain the correct transmission and driveshaft angle. Precision cut and fully MIG-welded, then given a durable black powder coating finish to last a lifetime and give you peace of mind knowing you’re buying the best parts available for your Tremec TKO or TKX 5-speed or Magnum 6-speed conversions. You can surely trust the company that originally started out making conversion mounts back in 1958, Hurst Performance.
Features:
| Original price was: $334.00.$299.96Current price is: $299.96. | |
 | Hurst Universal Tunnel Patch | Many modern overdrive transmissions – like the Tremec T56 – are big! When retrofitting a newer transmission into an older car the transmission tunnel may very well be too small to fit the transmission when it is installed at the proper driveline angle. This tunnel patch is pre-curved and gives you a head start in making more room. The Hurst Universal tunnel patch is large enough for installing a most transmissions, including a Tremec Magnum 6-speed transmission in just about any vehicle. The universal tunnel patch is constructed from 18-gauge mild steel and is pre-rolled and tapered to accommodate most floor pans. As with most transmission conversions, trimming and fabrication will be required. Features:
| Original price was: $122.00.$108.95Current price is: $108.95. | |
 | Lakewood Bellhousing Bolt Kit Gen III Hemi to T56 and T56 Magnum | Bolt kit for T56 to Gen III Hemi
Lakewood has specialized in safety from the beginning. These Lakewood Bellhousing Bolts are no different. Built from High Strength Chromoly Steel, then Black Oxide Coated for a tough, long-lasting finish. This bolt kit provides the necessary fasteners to connect your bellhousing to both the engine (LS or LT) and transmission (T-56 or T-56 Magnum). Service Part for Lakewood #LK7100K bellhousing
Features:
| Original price was: $58.83.$52.95Current price is: $52.95. | |
 | Lakewood Hemi to T56 Bellhousing Kit | This Lakewood cast aluminum bellhousing connects Mopar Gen III Hemi engines to GM pattern T-56 and T-56 Magnum Transmissions. Designed as a compact, lightweight, and inexpensive option for transmission swaps not needing SFI certification, the LK7100K attaches in a factory-like manner to stock or Holley oil pans and includes a block plate for starter alignment and a dust shield for mid-sump pans. Rounding out the kit is a Grade 8/10.9 hardware kit (Lakewood #50394) for both engine and transmission so all you need to do is pick out your clutch, flywheel, and release bearing. Visit our transmission crossmember section to see if we offer a solution for your platform.
Features:
| Original price was: $534.00.$479.95Current price is: $479.95. | |
 | Lakewood T56 Bellhousing for LS and Gen V LT | Connects GM LS and LT Engines to Transmissions Utilizing the Standard GM T-56 and Magnum Pattern
This Lakewood cast aluminum bellhousing connects GM LS and Gen V LT engines to transmissions utilizing the standard GM pattern T-56 and T-56 Magnum. The bellhousing is intended for both GM cars and trucks and other various swap applications. They are a lightweight cast aluminum design much like the original equipment bells (work with OE starters, flywheels, etc.) and use a factory-like attachment to stock or Holley oil pans. These bellhousings are designed to be used with hydraulic release bearings only. We suggest the Hays #82-120 or Holley #319-100, but also carry the Holley #319-575 clutch installation kit that has everything you need: release bearing, clutch, flywheel, bolt kits, pilot bearing, and alignment tool. For additional protection of your clutch and flywheel and to properly align your starter, check out Quicktime Block Plate #RM-6007. *Fits all LS engines except LS4.
Features:
| Original price was: $367.00.$329.95Current price is: $329.95. | |
 | McLeod Racing 1979-2004 Ford Mustang Hydraulic Clutch Conversion Kit | Hydraulic Conversion Kit 1979-2004 Mustang. Tremec T-5/TKO 500/600/TKX. Replace your mechanical clutch linkage with a hydraulic setup – easier pedal effort and no adjustment needed! Hydraulic Conversion Kit -Ideal For Cars That Have Aging Mechanical Linkage Or Need Extra Space Due To A Motor Swap Or Other Changes, A Mcleod Hydraulic Kit Is Designed With The Very Best Components For Ease Of Install And Great Life. An Additional Benefit When Installing This Mcleod Hydraulic Kit Is The Self-Adjusting Bearing Feature. No More Adjusting The Clutch Every 4 to 6 Months. The Hydraulic Kit Will Allow The Bearing To Self Adjust When The Disc Wears Throughout It’s Life Cycle. Kits include the following items:
| $618.66 | |
 | Modern Driveline '57-'60 Ford F-Series Hydraulic Clutch Master Kit – .700 bore | Modern Driveline ’57-’60 Ford F-Series Hydraulic Clutch Master Kit – .700 bore Modern Driveline’s Lightfoot series Hydraulic Master cylinder clutch cylinder kit replaces the factory cast iron clutch master cylinder with a Modern aluminum master cylinder with the right size for today’s hydraulic slave cylinders. This translates to a drive you will love. Applications: 1957-1960 Ford F-Series Complete solutions of master and slave need to be optimized with matching fluid volume. Factory 57-60 Cast Iron Clutch Master Cylinder All MDL Hydraulic kits come with our 1-man Bleeder kit to make installation easier. | $235.00 | |
| Modern Driveline '57-'60 Ford F-Series Hydraulic Clutch Master Kit 3/4" Bore | Modern Driveline ’57-’60 Ford F-Series Hydraulic Clutch Master Kit – .750 bore Modern Driveline’s Lightfoot series Hydraulic Master cylinder clutch cylinder kit replaces the factory cast iron clutch master cylinder with a Modern aluminum master cylinder with the right size for today’s hydraulic slave cylinders. This translates to a drive you will love. Applications: 1957-1960 Ford F-Series Features:
Complete solutions of master and slave need to be optimized with matching fluid volume. Factory 57-60 Cast Iron Clutch Master Cylinder All MDL Hydraulic kits come with our 1-man Bleeder kit to make installation easier. | $225.00 | |
 | Modern Driveline '61-'66 Ford F-Series Hydraulic Clutch Master Kit LF Series .750 Bore | Modern Driveline ’61-’66 Ford F-Series Hydraulic Clutch Master Kit LF Series .750 Bore Light Foot Series 750 bore x 1.4″ stroke Modern Driveline Light Foot series Hydraulic Master cylinder clutch cylinder kit for 1961-1966 F-100 Series Pick up using the stock clutch pedal. Features:
Unique to MDL is the clutch pedal linkage that moves the master cylinder to provide room for brake boosters of all types and most importantly driver control. The Type 3 master cylinder utilizes a .750″ small-bore 1.4″ long-stroke cylinder to provide the most common fluid volume requirements needed in today’s hydraulic slave cylinders. Couple this master cylinder kit with either MDL LF series external slave cylinder kit or Tilton Engineering internal hydraulic release bearing results in a complete hydraulic clutch solution ready to install. Specifications: Type 3 = .750″ bore x 1.4″ stroke (.618cu/in) Output fitting size = AN4 All MDL Hydraulic master kits come with our unique One-man Bleeder Kit to help make installation easy. | $215.00 | |
 | Modern Driveline '61-'66 Ford F-Series Hydraulic Clutch Master Kit Remote Reservoir - .700 Bore | Modern Driveline ’61-’66 Ford F-Series Hydraulic Clutch Master Kit Remote Reservoir – .700 Bore Description: black plastic reservoir with 30″ hose Modern Driveline Light Foot series Hydraulic Master cylinder clutch kit for 1967-1972 F-100 Series Pick up uses the stock clutch pedal. Unique to MDL is the clutch pedal linkage that moves the master cylinder to provide room for brake boosters of all types and most importantly driver control. Gone are the days of having to engineer a kit from scratch only to leave you frustrated with the results. The Type 2 master cylinder utilizes a .700″ small-bore 1.4″ long-stroke cylinder to provide the most common fluid volume requirements needed in today’s hydraulic slave cylinders. Couple this master cylinder kit with either MDL LF series external slave cylinder kit or Tilton Engineering internal hydraulic release bearing results in a complete hydraulic clutch solution ready to install. Specifications: Type 2 = .700″ bore x 1.4″ stroke (.539cu/in) This is the preferred size for all of our slave cylinders. Output fitting size = AN4 All MDL Hydraulic master kits come with our unique One-man Bleeder Kit to help make installation easy. | $215.00 | |
 | Modern Driveline '61-'66 Ford F-Series LF Hydraulic Clutch Master Kit .700 Bore | 1961-1966 Ford F-Series LF (Light Foot) Hydraulic Clutch Master Kit (.700″ bore x 1.4″ stroke) Modern Driveline’s Lightfoot series Hydraulic Master cylinder clutch cylinder kit uses the stock clutch pedal. Features:
Unique to MDL is the clutch pedal linkage allows the master cylinder to use the stock clutch rod hole while providing room for factory vacuum brake booster but, most importantly driver control. The 61-66 Ford F-Series Hydraulic Clutch Master Kit utilizes a small bore long stroke cylinder to provide the most common fluid volume requirements needed in today’s hydraulic slave cylinders. Couple this master cylinder kit with either MDL LF series external slave cylinders kit or Tilton Engineering internal hydraulic release bearings results in a complete hydraulic clutch solution ready to install. Specifications: Type 2 = .700″ bore x 1.4″ stroke (.539cu/in) This is the preferred size for all of our slave cylinders. Output fitting size = AN4
| $215.00 | |
 | Modern Driveline '64.5-'66 Ford Mustang Hydraulic Clutch Master Kit – .750 Bore | Modern Driveline ‘64.5-’66 Ford Mustang Hydraulic Clutch Master Kit – .750 Bore Modern Driveline Light Foot series Hydraulic Master cylinder clutch cylinder kit for 64.5-66 Mustang using the stock clutch pedal. The Type 3 master cylinder utilizes a .750″ small bore 1.4″ long stroke cylinder to provide the most common fluid volume requirements needed in today’s hydraulic slave cylinders. Features:
Couple this master cylinder kit with either MDL LF series external slave cylinder kit or Tilton Engineering internal hydraulic release bearing results in a complete hydraulic clutch solution ready to install. | $270.00 | |
 | Modern Driveline '67-'72 Ford F-Series LF Hydraulic Clutch Master Kit – .700 Bore | Modern Driveline ’67-’72 Ford F-Series LF Hydraulic Clutch Master Kit – .700 Bore Modern Driveline’s Lightfoot series Hydraulic Master cylinder clutch cylinder kit replaces the factory cast iron clutch master cylinder with a Modern aluminum master cylinder with the right size for today’s hydraulic slave cylinders. This translates to a drive you will love. Applications: 1967-1972 Ford F-Series All MDL Hydraulic kits come with our 1-man Bleeder kit to make installation easier. | $250.00 | |
 | Modern Driveline '69-'70 Ford Mustang/Cougar Hydraulic Clutch Master Kit – .750 Bore | Modern Driveline ’69-’70 Ford Mustang/Cougar Hydraulic Clutch Master Kit – .750 Bore Modern Driveline Lightfoot series Hydraulic Master cylinder clutch cylinder kit for ’69-’70 Mustang/Cougar using the stock clutch pedal. Features:
All MDL Hydraulic kits come with our 1-man Bleeder kit to make installation easier. Unique to MDL is the clutch pedal linkage allows the master cylinder to use the stock clutch rod hole while providing room for factory vacuum brake booster but, most importantly driver control. Gone of the days of having to engineer a kit from scratch only to leave you frustrated with the results. The Type 3 master cylinder utilizes a small bore long stroke cylinder to provide the most common fluid volume requirements needed in today’s hydraulic slave cylinders. Coupled this master cylinder kit with either MDL LF series external slave cylinders kit or Tilton Engineering internal hydraulic release bearings, results in complete hydraulic clutch solution ready to install. | $265.00 | |
 | Modern Driveline Fox Body Mustang Hydraulic Clutch Master Kit 0.70 Inch Bore | Includes plastic clutch fluid reservoir. Master cylinder bore is 0.70″. From the SEMA award-winning team that brought you the SN95 Mustang Hydraulics. Modern Driveline’s Light Foot series Hydraulic clutch master cylinder kit MD-910-0052 fit 1979-93 Mustang/Capri and other Fox platforms. No longer will you have to worry about clutch cable clearance with long tube headers or heavy-duty clutches that cause the clutch cable to fail or heavy pedal effort. The master cylinder kit replaces the stock clutch cable and quadrant while using the stock clutch pedal and cable hole. The under-dash linkage converts the pull to a push using the stock clutch cable hole and clutch pedal. Our linkage was engineered using CAD modeling to provide the best pedal effort curve for a controlled clutch feel & improved driving experience. Our Fox clutch hydraulic system is the correct solution for many different conversion problems where a clutch cable is no longer used. ALL MDL Hydraulic master kits come with our unique One-man Bleeder Kit to help make installation easy. Fits:
LF (Light Foot) Series
| $570.00 | |
 | Modern Driveline Speedometer GM to Ford Adapter | Speedometer Cable Adapter GM Cable to Ford Slip-in gear drive Transmission speedometer adapter to convert from a Ford Slip in driven gear drive to a GM speedometer cable. Used a lot with Tremec TKX, TKO, 3550, Ford T-5, and Ford Tremec T56 with cable drive and all Tremec Magnum six speeds. | $19.50 | |
 | Muscle Rods C4 Corvette T56 Adapter Bracket | Muscle Rods C Beam Bracket For T56 Transmission Swap – install a T56 in your C4 Corvette! | $299.00 | |
 | Quick Time Bell - Chrysler 318, 360 with Viper T56, LS T56 | Perfect fit for Chrysler 318/340/360 with Dodge Viper Tremec T56 or GM LS T56 transmissions
Built from high grade steel – Work hardens to over 80,000 PSI strength. Over 2 times the strength of any other steel bellhousing.
Features:
| Original price was: $1,200.00.$1,079.95Current price is: $1,079.95. | |
 | Quick Time Bell - Chrysler Hemi with Viper T56, GM LS T56 | Fits 5.7L/6.1L/6.2L/6.4L Chrysler Hemi with Dodge Viper Tremec T56 or GM LS T56 transmissions, including Magnum and Magnum F
Built from high grade steel – Work hardens to over 80,000 PSI strength. Over 2 times the strength of any other steel bellhousing.
Features:
| Original price was: $1,134.00.$1,019.95Current price is: $1,019.95. | |
 | Quick Time Bellhousing Big Block Mopar to GM T56 | Perfect fit for Chrysler 383s, 400s, 426s, and 440s using GM T56 transmissions, including T56 Magnum and Magnum-F. Built from high grade steel – Work hardens to over 80,000 PSI strength. Over 2 times the strength of any other steel bellhousing.
Features:
| Original price was: $1,200.00.$1,079.95Current price is: $1,079.95. | |
 | Quick Time Bellhousing Mazda RX7 to T56 Transmission | This Quick Time bellhousing fits RX7 to T56 transmission.
Features:
| Original price was: $1,698.00.$1,527.95Current price is: $1,527.95. | |
 | Ron Francis Speedometer Wiring Harness for T56 Magnum, TKX, TKO | Speedometer wiring harness for Tremec T56 Magnum, TKX, and TKO transmissions. | $9.99 | |
 | Shift Lever Mount Bolt | Shift Lever Mount Bolt 3/8”-24 Flange head bolt with 1” under head length, this fits most Tremec T56, TKO, and TKX transmission shifters as well as many others. Grade 5. Sold individually, two required per shifter. | $2.99 | |
 | SMP T56 Reverse Light Harness | GM OEM reverse light harness for T56 (both gen 1 and gen 2) | $19.99 | |
 | Sonnax Slip Yoke 1330 U-Joint for T56 Magnum, TKX, Others | T56 Magnum Slip Yoke, also fits TKX Sonnax T2-3-6041HP performance forged slip yoke is an excellent upgrade over factory style transmission yokes, adding strength and durability at an affordable price. The T2-3-6041HP uses 1330 series u-joints and fits a variety of applications, including those listed here. These high performance slip yokes deliver superior strength and durability for high horsepower and torque capacity applications, from street car, to street rod, drag strip, to dirt oval track. Specs:
| $175.92 | |
 | Sonnax Slip Yoke 1350 U-Joint for T56 Magnum, TKX, Others | T56 Magnum Slip Yoke Sonnax forged chromoly performance slip yoke T3-3-2491HP is an excellent upgrade over factory style transmission yokes. This affordable yoke uses 1350 series u-joints, and fits several applications, including most T56, FMX, C6, Tremec, and ZF 5-speed transmissions. These high performance slip yokes deliver superior strength and durability for high horsepower and torque capacity applications, from street car, to street rod, drag strip, to dirt oval track. Specs:
| $172.17 | |
 | T56 Magnum Electronics and Reverse Lockout Install Package | We’ve made it easy to install a T56 Magnum transmission with our electronics and reverse lockout package. This includes:
Please contact us with any questions or to customize your package. | Original price was: $288.70.$265.35Current price is: $265.35. | |
 | Three Pedals Logo Billet Aluminum 6 Speed Shift Knob | Our billet aluminum shift knob for the T56 and TR6060 puts control in your hands. With its 2-1/4″ diameter it’s larger than many others and provides a substantial feel. This knob is black anodized. The engraved shift pattern and logos are bare aluminum. Shift pattern is for all T56 and TR6060 transmissions including Camaro, Corvette, Viper, Mustang, and more. M16x1.5 threads. The most popular adapters are sell are to 3/8″-16 threads and M12x1.5 threads. Please contact us for help selecting the correct adapter. | $49.99 | |
 | Tilton Twin Disc Clutch for C5, LS 6 Bolt with TKX, T56, Cerametallic | Tilton Twin Disc Clutch for 1997 – 2004 Corvette (C5), with cerametallic (semi-metallic) friction material and solid hubs Tilton has now applied their nearly 50 years of experience in racing clutches to develop the ST-246 line of twin disc clutch kits for the high-performance street market. Unlike many of the “performance clutches” on the market, ST-246 clutches were designed from the ground up as a true performance twin disc clutch and not an OEM-type stamped steel pressure plate with a floater added. Featuring an aluminum clutch cover that shares technology from Tilton’s championship winning line of OT- Series racing clutches, ST-246 clutches feature heavy duty straps that attach the pressure plate and floater plate to minimize noise. ST-246 clutches are available with either sprung-hub organic discs for street applications or solid-hub cerametallic discs for street/strip applications. All kits include a billet chromoly steel flywheel that features a precision register for the clutch to provide optimal balance of the clutch/ flywheel assembly. Features: – Precision machined aluminum clutch cover provides high-strength, stiffness and better dynamic balance than OE-type stamped steel covers. -High-mass main pressure plate and floater plate, machined from the same proprietary material as used in Tilton’s racing clutches, provides high heat capacity and resists. – Heavy-duty straps attach pressure plate and floater plate to the clutch cover, minimizing noise and providing fast & clean release between shifts. – Chromoly steel flywheel provides high-strength and long-term durability. Features a precision register to locate the clutch and provide optimal balance (as opposed to loose fitting bolts & dowels used with stamped steel clutches). – Weight and inertia engineered to provide a good balance of performance and drivability. – 246mm sprung-hub organic disc (850 lb-ft) and solid-hub cerametallic disc (1250 lb-ft) options. All ST-246 kits, except for Camaro GEN5, Corvette C6 and 2011-2017 Mustang GT can be used with OEM release bearings. ST-246 clutch kits for Camaro GEN5, Corvette C6 and 2011-2017 Mustang GT applications include an Tilton 6000-Series hydraulic release bearing (height preset at Tilton) that is designed to connect directly to the OEM clutch line. Most importantly, Tilton ST-246 clutch kits offer all this technology at a price point that is very competitive to the other clutches on the market. | Original price was: $1,755.00.$1,491.75Current price is: $1,491.75. | |
 | Tilton Twin Disc Clutch for C5, LS 6 Bolt with TKX, T56, Organic | Tilton Twin Disc Clutch for 1997 – 2004 Corvette (C5), with organic friction material and sprung hubs Tilton has now applied their nearly 50 years of experience in racing clutches to develop the ST-246 line of twin disc clutch kits for the high-performance street market. Unlike many of the “performance clutches” on the market, ST-246 clutches were designed from the ground up as a true performance twin disc clutch and not an OEM-type stamped steel pressure plate with a floater added. Featuring an aluminum clutch cover that shares technology from Tilton’s championship winning line of OT- Series racing clutches, ST-246 clutches feature heavy duty straps that attach the pressure plate and floater plate to minimize noise. ST-246 clutches are available with either sprung-hub organic discs for street applications or solid-hub cerametallic discs for street/strip applications. All kits include a billet chromoly steel flywheel that features a precision register for the clutch to provide optimal balance of the clutch/ flywheel assembly. Features: – Precision machined aluminum clutch cover provides high-strength, stiffness and better dynamic balance than OE-type stamped steel covers. -High-mass main pressure plate and floater plate, machined from the same proprietary material as used in Tilton’s racing clutches, provides high heat capacity and resists. – Heavy-duty straps attach pressure plate and floater plate to the clutch cover, minimizing noise and providing fast & clean release between shifts. – Chromoly steel flywheel provides high-strength and long-term durability. Features a precision register to locate the clutch and provide optimal balance (as opposed to loose fitting bolts & dowels used with stamped steel clutches). – Weight and inertia engineered to provide a good balance of performance and drivability. – 246mm sprung-hub organic disc (850 lb-ft) and solid-hub cerametallic disc (1250 lb-ft) options. All ST-246 kits, except for Camaro GEN5, Corvette C6 and 2011-2017 Mustang GT can be used with OEM release bearings. ST-246 clutch kits for Camaro GEN5, Corvette C6 and 2011-2017 Mustang GT applications include an Tilton 6000-Series hydraulic release bearing (height preset at Tilton) that is designed to connect directly to the OEM clutch line. Most importantly, Tilton ST-246 clutch kits offer all this technology at a price point that is very competitive to the other clutches on the market. | Original price was: $1,650.00.$1,402.50Current price is: $1,402.50. | |
| Tilton Twin Disc Clutch for Chevy Early SBC BBC with TKX, T56, Cerametallic, Neutral Bal | Tilton Twin Disc Clutch for Small Block Chevy engine with 2 piece rear main seal to Tremec T56, T56 Magnum, Magnum XL, Magnum F, and TKX transmissions, with cerametallic (semi-metallic) friction material and solid hubs Tilton has now applied their nearly 50 years of experience in racing clutches to develop the ST-246 line of twin disc clutch kits for the high-performance street market. Unlike many of the “performance clutches” on the market, ST-246 clutches were designed from the ground up as a true performance twin disc clutch and not an OEM-type stamped steel pressure plate with a floater added. Featuring an aluminum clutch cover that shares technology from Tilton’s championship winning line of OT- Series racing clutches, ST-246 clutches feature heavy duty straps that attach the pressure plate and floater plate to minimize noise. ST-246 clutches are available with either sprung-hub organic discs for street applications or solid-hub cerametallic discs for street/strip applications. All kits include a billet chromoly steel flywheel that features a precision register for the clutch to provide optimal balance of the clutch/ flywheel assembly. Features: – Precision machined aluminum clutch cover provides high-strength, stiffness and better dynamic balance than OE-type stamped steel covers. -High-mass main pressure plate and floater plate, machined from the same proprietary material as used in Tilton’s racing clutches, provides high heat capacity and resists. – Heavy-duty straps attach pressure plate and floater plate to the clutch cover, minimizing noise and providing fast & clean release between shifts. – Chromoly steel flywheel provides high-strength and long-term durability. Features a precision register to locate the clutch and provide optimal balance (as opposed to loose fitting bolts & dowels used with stamped steel clutches). – Weight and inertia engineered to provide a good balance of performance and drivability. – 246mm sprung-hub organic disc (850 lb-ft) and solid-hub cerametallic disc (1250 lb-ft) options. All ST-246 kits, except for Camaro GEN5, Corvette C6 and 2011-2017 Mustang GT can be used with OEM release bearings. ST-246 clutch kits for Camaro GEN5, Corvette C6 and 2011-2017 Mustang GT applications include an Tilton 6000-Series hydraulic release bearing (height preset at Tilton) that is designed to connect directly to the OEM clutch line. Most importantly, Tilton ST-246 clutch kits offer all this technology at a price point that is very competitive to the other clutches on the market. | Original price was: $1,755.00.$1,491.75Current price is: $1,491.75. | |
| Tilton Twin Disc Clutch for Chevy Early SBC BBC with TKX, T56, Organic, Neutral Bal | Tilton Twin Disc Clutch for Small Block Chevy engine with 2 piece rear main seal to Tremec T56, T56 Magnum, Magnum XL, Magnum F, and TKX transmissions, with organic friction material and sprung hubs Tilton has now applied their nearly 50 years of experience in racing clutches to develop the ST-246 line of twin disc clutch kits for the high-performance street market. Unlike many of the “performance clutches” on the market, ST-246 clutches were designed from the ground up as a true performance twin disc clutch and not an OEM-type stamped steel pressure plate with a floater added. Featuring an aluminum clutch cover that shares technology from Tilton’s championship winning line of OT- Series racing clutches, ST-246 clutches feature heavy duty straps that attach the pressure plate and floater plate to minimize noise. ST-246 clutches are available with either sprung-hub organic discs for street applications or solid-hub cerametallic discs for street/strip applications. All kits include a billet chromoly steel flywheel that features a precision register for the clutch to provide optimal balance of the clutch/ flywheel assembly. Features: – Precision machined aluminum clutch cover provides high-strength, stiffness and better dynamic balance than OE-type stamped steel covers. -High-mass main pressure plate and floater plate, machined from the same proprietary material as used in Tilton’s racing clutches, provides high heat capacity and resists. – Heavy-duty straps attach pressure plate and floater plate to the clutch cover, minimizing noise and providing fast & clean release between shifts. – Chromoly steel flywheel provides high-strength and long-term durability. Features a precision register to locate the clutch and provide optimal balance (as opposed to loose fitting bolts & dowels used with stamped steel clutches). – Weight and inertia engineered to provide a good balance of performance and drivability. – 246mm sprung-hub organic disc (850 lb-ft) and solid-hub cerametallic disc (1250 lb-ft) options. All ST-246 kits, except for Camaro GEN5, Corvette C6 and 2011-2017 Mustang GT can be used with OEM release bearings. ST-246 clutch kits for Camaro GEN5, Corvette C6 and 2011-2017 Mustang GT applications include an Tilton 6000-Series hydraulic release bearing (height preset at Tilton) that is designed to connect directly to the OEM clutch line. Most importantly, Tilton ST-246 clutch kits offer all this technology at a price point that is very competitive to the other clutches on the market. | Original price was: $1,650.00.$1,402.50Current price is: $1,402.50. | |
| Tilton Twin Disc Clutch for Ford Coyote with TKX, T56, Cerametallic | Tilton Twin Disc Clutch for Ford Modular / Coyote engine to Tremec T56, T56 Magnum, Magnum XL, Magnum F, and TKX transmissions, with cerametallic (semi-metallic) friction material and solid hubs Tilton has now applied their nearly 50 years of experience in racing clutches to develop the ST-246 line of twin disc clutch kits for the high-performance street market. Unlike many of the “performance clutches” on the market, ST-246 clutches were designed from the ground up as a true performance twin disc clutch and not an OEM-type stamped steel pressure plate with a floater added. Featuring an aluminum clutch cover that shares technology from Tilton’s championship winning line of OT- Series racing clutches, ST-246 clutches feature heavy duty straps that attach the pressure plate and floater plate to minimize noise. ST-246 clutches are available with either sprung-hub organic discs for street applications or solid-hub cerametallic discs for street/strip applications. All kits include a billet chromoly steel flywheel that features a precision register for the clutch to provide optimal balance of the clutch/ flywheel assembly. Features: – Precision machined aluminum clutch cover provides high-strength, stiffness and better dynamic balance than OE-type stamped steel covers. -High-mass main pressure plate and floater plate, machined from the same proprietary material as used in Tilton’s racing clutches, provides high heat capacity and resists. – Heavy-duty straps attach pressure plate and floater plate to the clutch cover, minimizing noise and providing fast & clean release between shifts. – Chromoly steel flywheel provides high-strength and long-term durability. Features a precision register to locate the clutch and provide optimal balance (as opposed to loose fitting bolts & dowels used with stamped steel clutches). – Weight and inertia engineered to provide a good balance of performance and drivability. – 246mm sprung-hub organic disc (850 lb-ft) and solid-hub cerametallic disc (1250 lb-ft) options. All ST-246 kits, except for Camaro GEN5, Corvette C6 and 2011-2017 Mustang GT can be used with OEM release bearings. ST-246 clutch kits for Camaro GEN5, Corvette C6 and 2011-2017 Mustang GT applications include an Tilton 6000-Series hydraulic release bearing (height preset at Tilton) that is designed to connect directly to the OEM clutch line. Most importantly, Tilton ST-246 clutch kits offer all this technology at a price point that is very competitive to the other clutches on the market. | Original price was: $1,755.00.$1,491.75Current price is: $1,491.75. | |
| Tilton Twin Disc Clutch for Ford Coyote with TKX, T56, Organic | Tilton Twin Disc Clutch for Ford Modular / Coyote engine to Tremec T56, T56 Magnum, Magnum XL, Magnum F, and TKX transmissions, with organic friction material and sprung hubs Tilton has now applied their nearly 50 years of experience in racing clutches to develop the ST-246 line of twin disc clutch kits for the high-performance street market. Unlike many of the “performance clutches” on the market, ST-246 clutches were designed from the ground up as a true performance twin disc clutch and not an OEM-type stamped steel pressure plate with a floater added. Featuring an aluminum clutch cover that shares technology from Tilton’s championship winning line of OT- Series racing clutches, ST-246 clutches feature heavy duty straps that attach the pressure plate and floater plate to minimize noise. ST-246 clutches are available with either sprung-hub organic discs for street applications or solid-hub cerametallic discs for street/strip applications. All kits include a billet chromoly steel flywheel that features a precision register for the clutch to provide optimal balance of the clutch/ flywheel assembly. Features: – Precision machined aluminum clutch cover provides high-strength, stiffness and better dynamic balance than OE-type stamped steel covers. -High-mass main pressure plate and floater plate, machined from the same proprietary material as used in Tilton’s racing clutches, provides high heat capacity and resists. – Heavy-duty straps attach pressure plate and floater plate to the clutch cover, minimizing noise and providing fast & clean release between shifts. – Chromoly steel flywheel provides high-strength and long-term durability. Features a precision register to locate the clutch and provide optimal balance (as opposed to loose fitting bolts & dowels used with stamped steel clutches). – Weight and inertia engineered to provide a good balance of performance and drivability. – 246mm sprung-hub organic disc (850 lb-ft) and solid-hub cerametallic disc (1250 lb-ft) options. All ST-246 kits, except for Camaro GEN5, Corvette C6 and 2011-2017 Mustang GT can be used with OEM release bearings. ST-246 clutch kits for Camaro GEN5, Corvette C6 and 2011-2017 Mustang GT applications include an Tilton 6000-Series hydraulic release bearing (height preset at Tilton) that is designed to connect directly to the OEM clutch line. Most importantly, Tilton ST-246 clutch kits offer all this technology at a price point that is very competitive to the other clutches on the market. | Original price was: $1,650.00.$1,402.50Current price is: $1,402.50. | |
| Tilton Twin Disc Clutch for Ford Small Block 28 Oz Balance with T56, TKX, Cerametallic | Tilton Twin Disc Clutch for Ford Small Block 5.0L / 302 / 351 with 28 ounce external balance to Tremec T56, T56 Magnum, Magnum XL, Magnum F, and TKX transmissions, with cerametallic (semi-metallic) friction material and solid hubs Tilton has now applied their nearly 50 years of experience in racing clutches to develop the ST-246 line of twin disc clutch kits for the high-performance street market. Unlike many of the “performance clutches” on the market, ST-246 clutches were designed from the ground up as a true performance twin disc clutch and not an OEM-type stamped steel pressure plate with a floater added. Featuring an aluminum clutch cover that shares technology from Tilton’s championship winning line of OT- Series racing clutches, ST-246 clutches feature heavy duty straps that attach the pressure plate and floater plate to minimize noise. ST-246 clutches are available with either sprung-hub organic discs for street applications or solid-hub cerametallic discs for street/strip applications. All kits include a billet chromoly steel flywheel that features a precision register for the clutch to provide optimal balance of the clutch/ flywheel assembly. Features: – Precision machined aluminum clutch cover provides high-strength, stiffness and better dynamic balance than OE-type stamped steel covers. -High-mass main pressure plate and floater plate, machined from the same proprietary material as used in Tilton’s racing clutches, provides high heat capacity and resists. – Heavy-duty straps attach pressure plate and floater plate to the clutch cover, minimizing noise and providing fast & clean release between shifts. – Chromoly steel flywheel provides high-strength and long-term durability. Features a precision register to locate the clutch and provide optimal balance (as opposed to loose fitting bolts & dowels used with stamped steel clutches). – Weight and inertia engineered to provide a good balance of performance and drivability. – 246mm sprung-hub organic disc (850 lb-ft) and solid-hub cerametallic disc (1250 lb-ft) options. All ST-246 kits, except for Camaro GEN5, Corvette C6 and 2011-2017 Mustang GT can be used with OEM release bearings. ST-246 clutch kits for Camaro GEN5, Corvette C6 and 2011-2017 Mustang GT applications include an Tilton 6000-Series hydraulic release bearing (height preset at Tilton) that is designed to connect directly to the OEM clutch line. Most importantly, Tilton ST-246 clutch kits offer all this technology at a price point that is very competitive to the other clutches on the market. | Original price was: $1,755.00.$1,491.75Current price is: $1,491.75. | |
| Tilton Twin Disc Clutch for Ford Small Block 28 Oz Balance with T56, TKX, Organic | Tilton Twin Disc Clutch for Ford Small Block 5.0L / 302 / 351 with 28 ounce external balance to Tremec T56, T56 Magnum, Magnum XL, Magnum F, and TKX transmissions, with organic friction material and sprung hubs Tilton has now applied their nearly 50 years of experience in racing clutches to develop the ST-246 line of twin disc clutch kits for the high-performance street market. Unlike many of the “performance clutches” on the market, ST-246 clutches were designed from the ground up as a true performance twin disc clutch and not an OEM-type stamped steel pressure plate with a floater added. Featuring an aluminum clutch cover that shares technology from Tilton’s championship winning line of OT- Series racing clutches, ST-246 clutches feature heavy duty straps that attach the pressure plate and floater plate to minimize noise. ST-246 clutches are available with either sprung-hub organic discs for street applications or solid-hub cerametallic discs for street/strip applications. All kits include a billet chromoly steel flywheel that features a precision register for the clutch to provide optimal balance of the clutch/ flywheel assembly. Features: – Precision machined aluminum clutch cover provides high-strength, stiffness and better dynamic balance than OE-type stamped steel covers. -High-mass main pressure plate and floater plate, machined from the same proprietary material as used in Tilton’s racing clutches, provides high heat capacity and resists. – Heavy-duty straps attach pressure plate and floater plate to the clutch cover, minimizing noise and providing fast & clean release between shifts. – Chromoly steel flywheel provides high-strength and long-term durability. Features a precision register to locate the clutch and provide optimal balance (as opposed to loose fitting bolts & dowels used with stamped steel clutches). – Weight and inertia engineered to provide a good balance of performance and drivability. – 246mm sprung-hub organic disc (850 lb-ft) and solid-hub cerametallic disc (1250 lb-ft) options. All ST-246 kits, except for Camaro GEN5, Corvette C6 and 2011-2017 Mustang GT can be used with OEM release bearings. ST-246 clutch kits for Camaro GEN5, Corvette C6 and 2011-2017 Mustang GT applications include an Tilton 6000-Series hydraulic release bearing (height preset at Tilton) that is designed to connect directly to the OEM clutch line. Most importantly, Tilton ST-246 clutch kits offer all this technology at a price point that is very competitive to the other clutches on the market. | Original price was: $1,705.00.$1,449.25Current price is: $1,449.25. | |
| Tilton Twin Disc Clutch for Ford Small Block 50 Oz Balance with T56, TKX, Cerametallic | Tilton Twin Disc Clutch for Ford Small Block 5.0L / 302 / 351 with 50 ounce external balance to Tremec T56, T56 Magnum, Magnum XL, Magnum F, and TKX transmissions, with cerametallic (semi-metallic) friction material and solid hubs Tilton has now applied their nearly 50 years of experience in racing clutches to develop the ST-246 line of twin disc clutch kits for the high-performance street market. Unlike many of the “performance clutches” on the market, ST-246 clutches were designed from the ground up as a true performance twin disc clutch and not an OEM-type stamped steel pressure plate with a floater added. Featuring an aluminum clutch cover that shares technology from Tilton’s championship winning line of OT- Series racing clutches, ST-246 clutches feature heavy duty straps that attach the pressure plate and floater plate to minimize noise. ST-246 clutches are available with either sprung-hub organic discs for street applications or solid-hub cerametallic discs for street/strip applications. All kits include a billet chromoly steel flywheel that features a precision register for the clutch to provide optimal balance of the clutch/ flywheel assembly. Features: – Precision machined aluminum clutch cover provides high-strength, stiffness and better dynamic balance than OE-type stamped steel covers. -High-mass main pressure plate and floater plate, machined from the same proprietary material as used in Tilton’s racing clutches, provides high heat capacity and resists. – Heavy-duty straps attach pressure plate and floater plate to the clutch cover, minimizing noise and providing fast & clean release between shifts. – Chromoly steel flywheel provides high-strength and long-term durability. Features a precision register to locate the clutch and provide optimal balance (as opposed to loose fitting bolts & dowels used with stamped steel clutches). – Weight and inertia engineered to provide a good balance of performance and drivability. – 246mm sprung-hub organic disc (850 lb-ft) and solid-hub cerametallic disc (1250 lb-ft) options. All ST-246 kits, except for Camaro GEN5, Corvette C6 and 2011-2017 Mustang GT can be used with OEM release bearings. ST-246 clutch kits for Camaro GEN5, Corvette C6 and 2011-2017 Mustang GT applications include an Tilton 6000-Series hydraulic release bearing (height preset at Tilton) that is designed to connect directly to the OEM clutch line. Most importantly, Tilton ST-246 clutch kits offer all this technology at a price point that is very competitive to the other clutches on the market. | Original price was: $1,755.00.$1,491.75Current price is: $1,491.75. | |
| Tilton Twin Disc Clutch for Ford Small Block 50 Oz Balance with T56, TKX, Organic | Tilton Twin Disc Clutch for Ford Small Block 5.0L / 302 / 351 with 50 ounce external balance to Tremec T56, T56 Magnum, Magnum XL, Magnum F, and TKX transmissions, with organic friction material and sprung hubs Tilton has now applied their nearly 50 years of experience in racing clutches to develop the ST-246 line of twin disc clutch kits for the high-performance street market. Unlike many of the “performance clutches” on the market, ST-246 clutches were designed from the ground up as a true performance twin disc clutch and not an OEM-type stamped steel pressure plate with a floater added. Featuring an aluminum clutch cover that shares technology from Tilton’s championship winning line of OT- Series racing clutches, ST-246 clutches feature heavy duty straps that attach the pressure plate and floater plate to minimize noise. ST-246 clutches are available with either sprung-hub organic discs for street applications or solid-hub cerametallic discs for street/strip applications. All kits include a billet chromoly steel flywheel that features a precision register for the clutch to provide optimal balance of the clutch/ flywheel assembly. Features: – Precision machined aluminum clutch cover provides high-strength, stiffness and better dynamic balance than OE-type stamped steel covers. -High-mass main pressure plate and floater plate, machined from the same proprietary material as used in Tilton’s racing clutches, provides high heat capacity and resists. – Heavy-duty straps attach pressure plate and floater plate to the clutch cover, minimizing noise and providing fast & clean release between shifts. – Chromoly steel flywheel provides high-strength and long-term durability. Features a precision register to locate the clutch and provide optimal balance (as opposed to loose fitting bolts & dowels used with stamped steel clutches). – Weight and inertia engineered to provide a good balance of performance and drivability. – 246mm sprung-hub organic disc (850 lb-ft) and solid-hub cerametallic disc (1250 lb-ft) options. All ST-246 kits, except for Camaro GEN5, Corvette C6 and 2011-2017 Mustang GT can be used with OEM release bearings. ST-246 clutch kits for Camaro GEN5, Corvette C6 and 2011-2017 Mustang GT applications include an Tilton 6000-Series hydraulic release bearing (height preset at Tilton) that is designed to connect directly to the OEM clutch line. Most importantly, Tilton ST-246 clutch kits offer all this technology at a price point that is very competitive to the other clutches on the market. | Original price was: $1,705.00.$1,449.25Current price is: $1,449.25. | |
| Tilton Twin Disc Clutch for Ford Small Block with TKX, T56, Cerametallic, Neutral Bal | Tilton Twin Disc Clutch for Ford Small Block 5.0L / 302 / 351 with neutral balance to Tremec T56, T56 Magnum, Magnum XL, Magnum F, and TKX transmissions, with cerametallic (semi-metallic) friction material and solid hubs Tilton has now applied their nearly 50 years of experience in racing clutches to develop the ST-246 line of twin disc clutch kits for the high-performance street market. Unlike many of the “performance clutches” on the market, ST-246 clutches were designed from the ground up as a true performance twin disc clutch and not an OEM-type stamped steel pressure plate with a floater added. Featuring an aluminum clutch cover that shares technology from Tilton’s championship winning line of OT- Series racing clutches, ST-246 clutches feature heavy duty straps that attach the pressure plate and floater plate to minimize noise. ST-246 clutches are available with either sprung-hub organic discs for street applications or solid-hub cerametallic discs for street/strip applications. All kits include a billet chromoly steel flywheel that features a precision register for the clutch to provide optimal balance of the clutch/ flywheel assembly. Features: – Precision machined aluminum clutch cover provides high-strength, stiffness and better dynamic balance than OE-type stamped steel covers. -High-mass main pressure plate and floater plate, machined from the same proprietary material as used in Tilton’s racing clutches, provides high heat capacity and resists. – Heavy-duty straps attach pressure plate and floater plate to the clutch cover, minimizing noise and providing fast & clean release between shifts. – Chromoly steel flywheel provides high-strength and long-term durability. Features a precision register to locate the clutch and provide optimal balance (as opposed to loose fitting bolts & dowels used with stamped steel clutches). – Weight and inertia engineered to provide a good balance of performance and drivability. – 246mm sprung-hub organic disc (850 lb-ft) and solid-hub cerametallic disc (1250 lb-ft) options. All ST-246 kits, except for Camaro GEN5, Corvette C6 and 2011-2017 Mustang GT can be used with OEM release bearings. ST-246 clutch kits for Camaro GEN5, Corvette C6 and 2011-2017 Mustang GT applications include an Tilton 6000-Series hydraulic release bearing (height preset at Tilton) that is designed to connect directly to the OEM clutch line. Most importantly, Tilton ST-246 clutch kits offer all this technology at a price point that is very competitive to the other clutches on the market. | Original price was: $1,755.00.$1,491.75Current price is: $1,491.75. | |
| Tilton Twin Disc Clutch for Ford Small Block with TKX, T56, Organic, Neutral Bal | Tilton Twin Disc Clutch for Ford Small Block 5.0L / 302 / 351 with neutral balance to Tremec T56, T56 Magnum, Magnum XL, Magnum F, and TKX transmissions, with organic friction material and sprung hubs Tilton has now applied their nearly 50 years of experience in racing clutches to develop the ST-246 line of twin disc clutch kits for the high-performance street market. Unlike many of the “performance clutches” on the market, ST-246 clutches were designed from the ground up as a true performance twin disc clutch and not an OEM-type stamped steel pressure plate with a floater added. Featuring an aluminum clutch cover that shares technology from Tilton’s championship winning line of OT- Series racing clutches, ST-246 clutches feature heavy duty straps that attach the pressure plate and floater plate to minimize noise. ST-246 clutches are available with either sprung-hub organic discs for street applications or solid-hub cerametallic discs for street/strip applications. All kits include a billet chromoly steel flywheel that features a precision register for the clutch to provide optimal balance of the clutch/ flywheel assembly. Features: – Precision machined aluminum clutch cover provides high-strength, stiffness and better dynamic balance than OE-type stamped steel covers. -High-mass main pressure plate and floater plate, machined from the same proprietary material as used in Tilton’s racing clutches, provides high heat capacity and resists. – Heavy-duty straps attach pressure plate and floater plate to the clutch cover, minimizing noise and providing fast & clean release between shifts. – Chromoly steel flywheel provides high-strength and long-term durability. Features a precision register to locate the clutch and provide optimal balance (as opposed to loose fitting bolts & dowels used with stamped steel clutches). – Weight and inertia engineered to provide a good balance of performance and drivability. – 246mm sprung-hub organic disc (850 lb-ft) and solid-hub cerametallic disc (1250 lb-ft) options. All ST-246 kits, except for Camaro GEN5, Corvette C6 and 2011-2017 Mustang GT can be used with OEM release bearings. ST-246 clutch kits for Camaro GEN5, Corvette C6 and 2011-2017 Mustang GT applications include an Tilton 6000-Series hydraulic release bearing (height preset at Tilton) that is designed to connect directly to the OEM clutch line. Most importantly, Tilton ST-246 clutch kits offer all this technology at a price point that is very competitive to the other clutches on the market. | Original price was: $1,650.00.$1,402.50Current price is: $1,402.50. | |
| Tilton Twin Disc Clutch for LSX, LT1, LT4 8 bolt with TKX, T56, Cerametallic | Tilton Twin Disc Clutch for LSA / LSX Engine to Tremec T56, T56 Magnum, Magnum XL, Magnum F, and TKX transmissions, with cerametallic (semi-metallic) friction material and solid hubs Tilton has now applied their nearly 50 years of experience in racing clutches to develop the ST-246 line of twin disc clutch kits for the high-performance street market. Unlike many of the “performance clutches” on the market, ST-246 clutches were designed from the ground up as a true performance twin disc clutch and not an OEM-type stamped steel pressure plate with a floater added. Featuring an aluminum clutch cover that shares technology from Tilton’s championship winning line of OT- Series racing clutches, ST-246 clutches feature heavy duty straps that attach the pressure plate and floater plate to minimize noise. ST-246 clutches are available with either sprung-hub organic discs for street applications or solid-hub cerametallic discs for street/strip applications. All kits include a billet chromoly steel flywheel that features a precision register for the clutch to provide optimal balance of the clutch/ flywheel assembly. Features: – Precision machined aluminum clutch cover provides high-strength, stiffness and better dynamic balance than OE-type stamped steel covers. -High-mass main pressure plate and floater plate, machined from the same proprietary material as used in Tilton’s racing clutches, provides high heat capacity and resists. – Heavy-duty straps attach pressure plate and floater plate to the clutch cover, minimizing noise and providing fast & clean release between shifts. – Chromoly steel flywheel provides high-strength and long-term durability. Features a precision register to locate the clutch and provide optimal balance (as opposed to loose fitting bolts & dowels used with stamped steel clutches). – Weight and inertia engineered to provide a good balance of performance and drivability. – 246mm sprung-hub organic disc (850 lb-ft) and solid-hub cerametallic disc (1250 lb-ft) options. All ST-246 kits, except for Camaro GEN5, Corvette C6 and 2011-2017 Mustang GT can be used with OEM release bearings. ST-246 clutch kits for Camaro GEN5, Corvette C6 and 2011-2017 Mustang GT applications include an Tilton 6000-Series hydraulic release bearing (height preset at Tilton) that is designed to connect directly to the OEM clutch line. Most importantly, Tilton ST-246 clutch kits offer all this technology at a price point that is very competitive to the other clutches on the market. | Original price was: $1,755.00.$1,491.75Current price is: $1,491.75. | |
| Tilton Twin Disc Clutch for LSX, LT1, LT4 8 bolt with TKX, T56, Organic | Tilton Twin Disc Clutch for LSA / LSX Engine to Tremec T56, T56 Magnum, Magnum XL, Magnum F, and TKX transmissions, with organic friction material and sprung hubs Tilton has now applied their nearly 50 years of experience in racing clutches to develop the ST-246 line of twin disc clutch kits for the high-performance street market. Unlike many of the “performance clutches” on the market, ST-246 clutches were designed from the ground up as a true performance twin disc clutch and not an OEM-type stamped steel pressure plate with a floater added. Featuring an aluminum clutch cover that shares technology from Tilton’s championship winning line of OT- Series racing clutches, ST-246 clutches feature heavy duty straps that attach the pressure plate and floater plate to minimize noise. ST-246 clutches are available with either sprung-hub organic discs for street applications or solid-hub cerametallic discs for street/strip applications. All kits include a billet chromoly steel flywheel that features a precision register for the clutch to provide optimal balance of the clutch/ flywheel assembly. Features: – Precision machined aluminum clutch cover provides high-strength, stiffness and better dynamic balance than OE-type stamped steel covers. -High-mass main pressure plate and floater plate, machined from the same proprietary material as used in Tilton’s racing clutches, provides high heat capacity and resists. – Heavy-duty straps attach pressure plate and floater plate to the clutch cover, minimizing noise and providing fast & clean release between shifts. – Chromoly steel flywheel provides high-strength and long-term durability. Features a precision register to locate the clutch and provide optimal balance (as opposed to loose fitting bolts & dowels used with stamped steel clutches). – Weight and inertia engineered to provide a good balance of performance and drivability. – 246mm sprung-hub organic disc (850 lb-ft) and solid-hub cerametallic disc (1250 lb-ft) options. All ST-246 kits, except for Camaro GEN5, Corvette C6 and 2011-2017 Mustang GT can be used with OEM release bearings. ST-246 clutch kits for Camaro GEN5, Corvette C6 and 2011-2017 Mustang GT applications include an Tilton 6000-Series hydraulic release bearing (height preset at Tilton) that is designed to connect directly to the OEM clutch line. Most importantly, Tilton ST-246 clutch kits offer all this technology at a price point that is very competitive to the other clutches on the market. | Original price was: $1,650.00.$1,402.50Current price is: $1,402.50. | |
| Tilton Twin Disc Clutch for Mopar Gen 3 Hemi, T56, Cerametallic | Tilton Twin Disc Clutch for Chrysler Mopar Hemi Gen 3 to Tremec T56, T56 Magnum, Magnum XL, Magnum F, and TKX transmissions, with cerametallic (semi-metallic) friction material and solid hubs Tilton has now applied their nearly 50 years of experience in racing clutches to develop the ST-246 line of twin disc clutch kits for the high-performance street market. Unlike many of the “performance clutches” on the market, ST-246 clutches were designed from the ground up as a true performance twin disc clutch and not an OEM-type stamped steel pressure plate with a floater added. Featuring an aluminum clutch cover that shares technology from Tilton’s championship winning line of OT- Series racing clutches, ST-246 clutches feature heavy duty straps that attach the pressure plate and floater plate to minimize noise. ST-246 clutches are available with either sprung-hub organic discs for street applications or solid-hub cerametallic discs for street/strip applications. All kits include a billet chromoly steel flywheel that features a precision register for the clutch to provide optimal balance of the clutch/ flywheel assembly. Features: – Precision machined aluminum clutch cover provides high-strength, stiffness and better dynamic balance than OE-type stamped steel covers. -High-mass main pressure plate and floater plate, machined from the same proprietary material as used in Tilton’s racing clutches, provides high heat capacity and resists. – Heavy-duty straps attach pressure plate and floater plate to the clutch cover, minimizing noise and providing fast & clean release between shifts. – Chromoly steel flywheel provides high-strength and long-term durability. Features a precision register to locate the clutch and provide optimal balance (as opposed to loose fitting bolts & dowels used with stamped steel clutches). – Weight and inertia engineered to provide a good balance of performance and drivability. – 246mm sprung-hub organic disc (850 lb-ft) and solid-hub cerametallic disc (1250 lb-ft) options. All ST-246 kits, except for Camaro GEN5, Corvette C6 and 2011-2017 Mustang GT can be used with OEM release bearings. ST-246 clutch kits for Camaro GEN5, Corvette C6 and 2011-2017 Mustang GT applications include an Tilton 6000-Series hydraulic release bearing (height preset at Tilton) that is designed to connect directly to the OEM clutch line. Most importantly, Tilton ST-246 clutch kits offer all this technology at a price point that is very competitive to the other clutches on the market. | Original price was: $1,855.00.$1,576.75Current price is: $1,576.75. | |
| Tilton Twin Disc Clutch for Mopar Gen 3 Hemi, T56, Organic | Tilton Twin Disc Clutch for Chrysler Mopar Hemi Gen 3 to Tremec T56, T56 Magnum, Magnum XL, Magnum F, and TKX transmissions, with organic friction material and sprung hubs Tilton has now applied their nearly 50 years of experience in racing clutches to develop the ST-246 line of twin disc clutch kits for the high-performance street market. Unlike many of the “performance clutches” on the market, ST-246 clutches were designed from the ground up as a true performance twin disc clutch and not an OEM-type stamped steel pressure plate with a floater added. Featuring an aluminum clutch cover that shares technology from Tilton’s championship winning line of OT- Series racing clutches, ST-246 clutches feature heavy duty straps that attach the pressure plate and floater plate to minimize noise. ST-246 clutches are available with either sprung-hub organic discs for street applications or solid-hub cerametallic discs for street/strip applications. All kits include a billet chromoly steel flywheel that features a precision register for the clutch to provide optimal balance of the clutch/ flywheel assembly. Features: – Precision machined aluminum clutch cover provides high-strength, stiffness and better dynamic balance than OE-type stamped steel covers. -High-mass main pressure plate and floater plate, machined from the same proprietary material as used in Tilton’s racing clutches, provides high heat capacity and resists. – Heavy-duty straps attach pressure plate and floater plate to the clutch cover, minimizing noise and providing fast & clean release between shifts. – Chromoly steel flywheel provides high-strength and long-term durability. Features a precision register to locate the clutch and provide optimal balance (as opposed to loose fitting bolts & dowels used with stamped steel clutches). – Weight and inertia engineered to provide a good balance of performance and drivability. – 246mm sprung-hub organic disc (850 lb-ft) and solid-hub cerametallic disc (1250 lb-ft) options. All ST-246 kits, except for Camaro GEN5, Corvette C6 and 2011-2017 Mustang GT can be used with OEM release bearings. ST-246 clutch kits for Camaro GEN5, Corvette C6 and 2011-2017 Mustang GT applications include an Tilton 6000-Series hydraulic release bearing (height preset at Tilton) that is designed to connect directly to the OEM clutch line. Most importantly, Tilton ST-246 clutch kits offer all this technology at a price point that is very competitive to the other clutches on the market. | Original price was: $1,750.00.$1,487.50Current price is: $1,487.50. | |
 | Timken T56 Magnum Tail Housing Seal | Timken seal for the T56 Magnum tail housing. This is where the driveshaft inserts into the transmission. Also fits T5 transmission with 27 spline output shaft. This part # interchanges with National, SKF, and other brands. The actual seal we ship will be one of these brands. This interchanges with Tremec part # 1300-044-019. Dimensions:
| Original price was: $17.38.$14.99Current price is: $14.99. | |
 | Tremec Mechanical Speedometer Housing and 16T Purple Gear - TKX, Magnum, TKO | Tremec T-56 Magnum, TKX and TKO transmissions use a Ford speedometer drive and require this adapter or a custom speedometer cable. This package is the easiest and most economical solution to connect to your existing GM 7/8″ threaded cable to the transmission and includes the speedometer gear of your choice. This part number is for the purple 16 tooth gear. Please contact us with any questions or if you need related accessories. | $93.00 | |
 | Tremec Mechanical Speedometer Housing and 17T White Gear - TKX, Magnum, TKO | Tremec T-56 Magnum, TKX and TKO transmissions use a Ford speedometer drive and require this adapter or a custom speedometer cable. This package is the easiest and most economical solution to connect to your existing GM 7/8″ threaded cable to the transmission and includes the speedometer gear of your choice. This part number is for the white 17 tooth gear. Please contact us with any questions or if you need related accessories. | $93.00 | |
 | Tremec Mechanical Speedometer Housing and 18T Yellow Gear - TKX, Magnum, TKO | Tremec T-56 Magnum, TKX and TKO transmissions use a Ford speedometer drive and require this adapter or a custom speedometer cable. This package is the easiest and most economical solution to connect to your existing GM 7/8″ threaded cable to the transmission and includes the speedometer gear of your choice. This part number is for the yellow 18 tooth gear. Please contact us with any questions or if you need related accessories. | $93.00 | |
 | Tremec Mechanical Speedometer Housing and 19T Pink Gear - TKX, Magnum, TKO | Tremec T-56 Magnum, TKX and TKO transmissions use a Ford speedometer drive and require this adapter or a custom speedometer cable. This package is the easiest and most economical solution to connect to your existing GM 7/8″ threaded cable to the transmission and includes the speedometer gear of your choice. This part number is for the pink 19 tooth gear. Please contact us with any questions or if you need related accessories. | $93.00 | |
 | Tremec Mechanical Speedometer Housing and 20T Black Gear - TKX, Magnum, TKO | Tremec T-56 Magnum, TKX and TKO transmissions use a Ford speedometer drive and require this adapter or a custom speedometer cable. This package is the easiest and most economical solution to connect to your existing GM 7/8″ threaded cable to the transmission and includes the speedometer gear of your choice. This part number is for the black 20 tooth gear. Please contact us with any questions or if you need related accessories. | $93.00 | |
 | Tremec Mechanical Speedometer Housing and 21T Red Gear - TKX, Magnum, TKO | Tremec T-56 Magnum, TKX and TKO transmissions use a Ford speedometer drive and require this adapter or a custom speedometer cable. This package is the easiest and most economical solution to connect to your existing GM 7/8″ threaded cable to the transmission and includes the speedometer gear of your choice. This part number is for the red 21 tooth gear. Please contact us with any questions or if you need related accessories. | $93.00 |