Universal

AutoMeter Invision LCD Dash Universal Panel Mount

Approx. 4 – 6 week lead time to shipment

Instrumentation is the focal point of any interior. Make your dash stand out from the crowd with the new Universal InVision Digital Dash from AutoMeter. This complete dash system with four user selectable screens is a one model, universal solution for your entire dash. Monitor the speedometer, tachometer, fuel level, oil pressure, water temperature, and volts all in one place. Upgrade your dash with the latest, modern LCD offering from AutoMeter.

Features:

• 12.3” LCD display with three user selectable screens
• Features high beam & turn signal indicators as well as user selectable warning light
• All kits include a wiring harness and sending units for water temperature and oil pressure as well as a joystick for dash customization
• Adjustable RPM range and displays in imperial or metric measurements
• Helps protect your vehicle with visual or audible alarms – low fuel level/oil pressure/voltage and high water temperature
• Speedometer easily calibrates to OEM or aftermarket vehicle speed sensors and the tachometer is capable of calibrating to many engine types
• Speed sensor not included

Ships With:

• 2258, 2242
• 3/8″ NPT and 1/2″ NPT adapter fittings
• Brackets Included

Instructions

Bowler Billet Shift Bezel Rectangular, Aluminum Finish

The new Bowler billet shift bezel is CNC machined from 6061 aluminum. No more unraveling carpet when installing your bezel. With Bowler’s unique hold down system, you get a clean install every time. Kit Includes

• Billet shift bezel top ring
• Billet Shift bezel lower mount plate
• 8 stainless mount bolts (Metric 2mm allen wrench required)
• 4 Mount bolts & 4 clamp plates
• 1 Leather Like Boot

Options for mounting the plate: Option 1: You may want to use self taping bolts or sheet metal screws to mount directly to the tunnel or console. Option 2: We include 4 mount bolts and 4 mount straps that can used to mount the plate as indicated in Fig. 1. This option will allow you to mount the plate if the hole in your tunnel is already larger than the 4 mount holes, allowing the bolts to go all the way through and mount to the 4 clamp plates. You can then center the bezel where needed and tighten the 4 bolts to pinch the tunnel sheet metal between the lower mount plate and the clamp plates. Rectangular Shift Bezel Dimensions

Bowler Billet Shift Bezel Rectangular – Black Anodized Finish

The new Bowler billet shift bezel is CNC machined from 6061 aluminum. No more unraveling carpet when installing your bezel. With Bowler’s unique hold down system, you get a clean install every time. Kit Includes

• Billet shift bezel top ring
• Billet Shift bezel lower mount plate
• 8 stainless mount bolts (Metric 2mm allen wrench required)
• 4 Mount bolts & 4 clamp plates
• 1 Leather Like Boot

Options for mounting the plate: Option 1: You may want to use self taping bolts or sheet metal screws to mount directly to the tunnel or console. Option 2: We include 4 mount bolts and 4 mount straps that can used to mount the plate as indicated in Fig. 1. This option will allow you to mount the plate if the hole in your tunnel is already larger than the 4 mount holes, allowing the bolts to go all the way through and mount to the 4 clamp plates. You can then center the bezel where needed and tighten the 4 bolts to pinch the tunnel sheet metal between the lower mount plate and the clamp plates. Rectangular Shift Bezel Dimensions

Bowler Billet Shift Bezel Round – Aluminum Finish

No more cheap looking ring around your shift lever! The Bowler Billet Shift Bezel is CNC machined from 6061 aluminum and is available in the classic raw machined finish or ultra-cool black anodized.

It is the perfect complement to Bowler’s Billet Shifter. A black leather like boot comes with the bezel or you can make your own to match your interior. No more unraveling carpet when installing your bezel. With Bowler’s unique hold down system, you get a clean install every time.

Kit Includes

• Billet shift bezel top ring
• Billet Shift bezel lower mount plate
• Stainless mount bolts (*Metric 2mm allen wrench required)
• 4 Mount bolts & 4 clamp plates
• 1 Leather Like Boot

Round Shift Bezel Dimensions

Bowler Billet Shift Bezel Round – Black Anodized Finish

No more cheap looking ring around your shift lever! The Bowler Billet Shift Bezel is CNC machined from 6061 aluminum and is available in the classic raw machined finish or ultra-cool black anodized.

It is the perfect complement to Bowler’s Billet Shifter. A black leather like boot comes with the bezel or you can make your own to match your interior. No more unraveling carpet when installing your bezel. With Bowler’s unique hold down system, you get a clean install every time.

Kit Includes

• Billet shift bezel top ring
• Billet Shift bezel lower mount plate
• Stainless mount bolts (*Metric 2mm allen wrench required)
• 4 Mount bolts & 4 clamp plates
• 1 Leather Like Boot

Round Shift Bezel Dimensions

Bowler Performance has engineered an easy solution to add a hydraulic clutch master cylinder to your firewall. This unique universal design allows easy fitment into any vehicles that have a flat firewall or a custom firewall. Simply mount the master cylinder bracket to your firewall with the supplied hardware. Use the included template on the inside of your firewall to find the perfect location inline with your factory or aftermarket clutch pedal. Double check the exterior firewall to ensure proper clearance for the new master cylinder bracket. Pedal and slave cylinder not included.

Includes:

• Bowler universal firewall mount
• Tilton 78 Series master cylinder with 13/16″ bore – alternative bore sizes available, please contact us for options
• -4AN fittings
• Hardware
• 24″ braided line
• Billet Reservoir
• Pedal linkage

We recommend using Tilton 6000 Hydraulic Bearing Assembly (not included) – please contact us for help in selecting just the right parts for your setup.

Installation instructions

Bowler Performance has engineered an easy solution to add a hydraulic clutch master cylinder to your firewall. This unique universal design allows easy fitment into any vehicles that have a flat firewall or a custom firewall. Simply mount the master cylinder bracket to your firewall with the supplied hardware. Use the included template on the inside of your firewall to find the perfect location inline with your factory or aftermarket clutch pedal. Double check the exterior firewall to ensure proper clearance for the new master cylinder bracket.

Pedal, master cylinder, and slave cylinder not included.

Includes:

• Bowler universal firewall mount
• -4AN fittings
• Hardware
• 24″ braided line
• Billet Reservoir
• Pedal linkage

Does not include:

• Master cylinder – designed for the Tilton Series 78 master cylinder, available in 7 different bore sizes.  The most popular for TKX, T56, and TR606 retrofits is a 13/16″ bore, followed by 3/4″ bore and 7/8″ bore.
• Hydraulic release bearing – We recommend using Tilton 6000 Hydraulic Bearing Assembly (not included)

Please contact us for help in selecting just the right parts for your setup.

Installation instructions