- Display 15 Products per page
GM A-Body '64 - '67
| Image | Name | Summary | Price | Buy | Categories | hf:tax:product_cat |
|---|---|---|---|---|---|---|
 | 1964-1966 Chevelle and El Camino Clutch and Brake Pedal Assembly - Reproduction | These reproduction pedals are the perfect way to convert an automatic car to manual, or to replace worn or missing components in a factory manual vehicle. You’ll probably want a pair of new rubber pedal pads to go with these new arms – click here for the perfect part. Though listed for Chevy vehicles only, they fit many other GM vehicles if you’re converting to a hydraulic clutch at the same time. See below for details. This fits: 1964 – 1966 Chevy Chevelle Fitment in other GM modelsThis also fits the following vehicles, but uses a different clutch connection. By installing these pedals in one of the vehicles below, you can then use the McLeod Hydraulic Conversion Kit to run a hydraulic clutch. 1964 – 1966 Pontiac Tempest This product is drop shipped from the manufacturer and can be sent by ground shipping only | Original price was: $169.99.$155.99Current price is: $155.99. | Reproduction Pedals | reproduction-pedals pedals | |
 | Bowler 1967 Chevelle / GTO / Le Mans / El Camino Hydraulic Master Cylinder Kit | 1967 GM A-Body, Chevelle, Lemans, GTO, or El Camino hydraulic master cylinder kit with a plastic reservoir. Designed & engineered for retrofitting clutch hydraulics into your 1967 Chevelle, Lemans, GTO, or El Camino. Direct mount onto all original 4-speed chassis. No flexing of bracket. Includes:
Does Not Include:
Please contact us for help in selecting just the right parts for your setup. | $489.90 | Pedals, Pedals & Drivetrain Swaps | pedals pedals-drivetrain-swaps hot-products | |
 | Dakota Digital 78-88 Oldsmobile Cutlass - VHX Black Face, Red Display | The new VHX Systems fit directly into the stock instrument bezel of a 1978- 88 Oldsmobile Cutlass without modification, adding a wealth of features to this iconic vehicle. Fully lit needles, backlit faces, and highly visible LCD message centers are a few of the things that you can see which set the VHX Series apart from yesterday’s traditional approach to instrumentation. A few of the features which you don’t normally see are the micro-controlled precision stepper motors, solid state sensors for unparalleled accuracy, and user-customizable display feedback, all supported by an unrivaled limited lifetime warranty which has become the standard for Dakota Digital instrumentation systems. Completely engineered and manufactured at our facility in Sioux Falls, South Dakota, the VHX Series has completely revolutionized the instrumentation industry! Black Alloy Style Face with Red LED lighting. | Original price was: $945.00.$897.75Current price is: $897.75. | Gauge Cluster | gauge-cluster displays-gauges | |
 | Driveline Components Short Throw Shifter for 2016+ TR6060 in '64-'67 GM A-Body Chevelle and More-Ven | This shifter fits the 2016 – 2024 Camaro Tremec TR6060 direct mount shifter location and puts the shift lever in just the right place for ’63-’67 Chevy II and Nova, ’68-’74 Chevy Nova, and ’64-’67 Chevy Chevelle and Malibu. Click here for 2010 – 2015 Camaro Tremec TR6060 Please see our TR6060 FAQ. The shift lever stub is offset from the shifter 2″ towards the driver side and a tick less than 3″ back, putting the shift lever stub in the factory 4 speed shifter location. Shift lever not included. This uses a common two-bolt mount, with 7/8″ spacing between the bolts. We have many different sizes available to suit your needs. Fits:
Photo is of a different Driveline Components shifter | $370.00 | Shifters | shifters | |
 | Driveline Components Short Throw Shifter for Magnum in '64-'67 Chevelle with Stops | Tremec T56 Magnum shifter for 1964-1967 Chevrolet Chevelle, 1963-1967 Chevy II and Nova, and 1968-1974 Chevy Nova This shifter replaces the stock Magnum shifter and is oriented with the shifter in the front position (front of the rear socket) and is offset perfectly to fit the exact location of the factory 4 speed console. We offer multiple offsets, please contact us with your needs. Shifter includes adjustable shift stops which we recommend with any lever longer than 8″. Shift lever not included – for ’64-’67 Chevelle this Hurst lever will be perfect. This uses a common two-bolt mount, with 7/8″ spacing between the bolts. We have many different sizes available to suit your needs. Similar but different shifter pictured | $394.00 | Shifters | shifters | |
| Driveline Components Short Throw Shifter for Magnum in '64-'67 Chevelle, Others | Tremec T56 Magnum shifter for 1964-1967 Chevrolet Chevelle, 1963-1967 Chevy II and Nova, and 1968-1974 Chevy Nova This shifter replaces the stock Magnum shifter and is oriented with the shifter in the front position (front of the rear socket) and is offset perfectly to fit the exact location of the factory 4 speed console. We offer multiple offsets, please contact us with your needs. Shift lever not included – for ’64-’67 Chevelle this Hurst lever will be perfect. This uses a common two-bolt mount, with 7/8″ spacing between the bolts. We have many different sizes available to suit your needs. Similar but different shifter pictured | $360.00 | Shifters | shifters | |
 | Driveline Components Short Throw Shifter for TR6060 in '64-'67 GM A-Body Chevelle and More | This shifter fits the 2010 – 2015 Camaro Tremec TR6060 direct mount shifter location and puts the shift lever in just the right place for ’63-’67 Chevy II and Nova, ’68-’74 Chevy Nova, and ’64-’67 Chevy Chevelle and Malibu. Click here for 2016 – 2024 Camaro Tremec TR6060 Please see our TR6060 FAQ. The shift lever stub is offset from the shifter 2″ towards the driver side and a tick less than 3″ back, putting the shift lever stub in the factory 4 speed shifter location. Shift lever not included. This uses a common two-bolt mount, with 7/8″ spacing between the bolts. We have many different sizes available to suit your needs. Fits:
Photo is of a different Driveline Components shifter | $360.00 | Shifters | shifters | |
| Driveline Components Short Throw Shifter for TR6060 in '64-'67 Pontiac and Oldsmobile | This shifter fits the Tremec TR6060 direct mount shifter location and puts the shift lever in just the right place for ’64 – ’67 Pontiac Le Mans and GTO, as well as Oldsmobile Cutlass. Please see our TR6060 FAQ. The shift lever stub is offset from the shifter 2″ towards the drive side and 4.25″ back, putting the shift lever stub in the factory 4 speed shifter location. Shift lever not included. This uses a common two-bolt mount, with 7/8″ spacing between the bolts. We have many different sizes available to suit your needs. Photo is of a different Driveline Components shifter | $330.00 | Shifters | shifters | |
| Driveline Components Short Throw Shifter for TR6060 with 1.65 Inch Forward Offset | This shifter fits the following transmissions:
This direct mount shifter replaces the factory semi-remote (aka divorced) shifter, bolting into the transmission mid case where the factory linkage enters the transmission. Please see our TR6060 FAQ. The shift lever stub is offset from the shifter by 1.65″ straight forward. We offer multiple offsets, please contact us with your needs. Shift lever not included. This uses a common two-bolt mount, with 7/8″ spacing between the bolts. We have many different sizes available to suit your needs. Photo is of a different Driveline Components shifter | $330.00 | Shifters | shifters | |
 | Hurst Competition Plus Round Replacement Stick - 11.1 Inch Height 2.3 Inch Setback | 11.12-inches tall x 2.26-inch set-back. Works with all Hurst two bolt style shifter assemblies. Usually used on Hurst shifter assemblies 3917308, 3917307, 3917930 and 3667271. Hurst bolt on shifter sticks are ideal for use in custom applications where a particular height or offset is required. These shifter sticks are constructed from high strength steel and are stamped with the Hurst name and has 3/8 – 16 threads. Can be used on any Hurst two bolt style shifter assembly. Made of chrome plated steel. Length (in): 11.4″ Thread size: 3/8″-16 | Original price was: $160.00.$143.95Current price is: $143.95. | Manual Transmission Shift Lever | manual-transmission-shift-lever shift-levers-shift-knobs | |
 | Hurst Competition Plus Stick - 11.1 Inch Height 2.3 Inch Setback | Hurst bolt-on shifter sticks are ideal for use in custom applications where a particular height or offset is required. These shifter sticks are constructed from high strength steel and are stamped with the Hurst name and has 3/8 – 16 threads. | Original price was: $167.00.$149.95Current price is: $149.95. | Manual Transmission Shift Lever | manual-transmission-shift-lever shift-levers-shift-knobs | |
 | Inline Tube 1967 Chevrolet Chevelle Clutch & Brake Pedal Assembly | Inline tube 1967 Chevrolet Chevelle Clutch & Brake Pedal Assembly
| $165.99 | Reproduction Pedals | reproduction-pedals pedals | |
 | McLeod Racing 1963-72 Chevelle Hydraulic Clutch Linkage Conversion Kit | Ideal for cars that have aging mechanical linkage or need extra space due to a motor swap or other changes, a McLeod Direct Fit Hydraulic Kit is designed with the very best components for ease of install and great life. An additional benefit when installing this McLeod hydraulic kit is the self-adjusting bearing feature. No more adjusting the clutch every 4 – 6 months. The hydraulic kit will allow the bearing to self adjust when the disc wears throughout it is life cycle. Include Master Cylinder and Line. Hydraulic bearing Must Be Purchased Separately Clutch pedal arm in photo is NOT included. We offer reproduction pedals – click here. Fitment in other GM modelsThis kit was designed to work with 1963-1972 Chevelle manual pedal box assemblies only. If you’re running a different GM A-Body model, we can get you setup if you’re going to a hydraulic clutch at the same time. Please contact us to confirm fitment. | $335.00 | Pedals, Pedals & Drivetrain Swaps | pedals pedals-drivetrain-swaps hot-products | |
 | Short Throw Shifter for Challenger TR6060 with 4.1 Inch Forward Offset | This shifter fits the Dodge Challenger TR6060, and moves the shift lever 4.1″ forward. This direct mount shifter replaces the factory semi-remote (aka divorced) shifter, bolting into the transmission tail housing where the factory linkage enters the transmission. Please see our TR6060 FAQ. The shift lever stub is offset from the shifter by 4.1″ straight forward. We offer multiple offsets, please contact us with your needs. Shift lever not included. This uses a common two-bolt mount, with 7/8″ spacing between the bolts. We have many different sizes available to suit your needs. Photo is of a different Driveline Components shifter | $340.00 | Shifters | shifters | |
| Short Throw Shifter w/Stops for Challenger TR6060 with 4.1 Inch Forward Offset | This shifter fits the Dodge Challenger TR6060, and moves the shift lever 4.1″ forward. Built-in shifter stops prevent damage, we recommend the stops for shift levers 10″ or longer. This direct mount shifter replaces the factory semi-remote (aka divorced) shifter, bolting into the transmission tail housing where the factory linkage enters the transmission. Please see our TR6060 FAQ. The shift lever stub is offset from the shifter by 4.1″ straight forward. We offer multiple offsets, please contact us with your needs. Shift lever not included. This uses a common two-bolt mount, with 7/8″ spacing between the bolts. We have many different sizes available to suit your needs. Photo is of a very similar but different Driveline Components shifter; shifter stops are shown in separate photos | $355.00 | Shifters | shifters | |
 | Tin Man 1964-1965 A-Body Transmission Crossmember - Convertible and El Camino | This crossmember fits 1964-1965 GM A-Body Convertible and El Camino models only. Convertible models include Chevrolet Chevelle, Pontiac Tempest and GTO, Buick Skylark. Tin Man’s transmission cross member for the 1964-1972 GM A Body utilize all the factory mount holes. This cross member will virtually bolt any GM transmission into your A-Body chassis. Fits many transmissions, auto and manual! 700R4, 4L60, and 4L65ENo modification is necessary to the transmission tunnel for a simple installation on 700R4, 4L60 and 4L65E transmissions while positioning the engine and transmission for correct driveline angles and best exhaust and firewall/radiator clearance. TKO, T56, 4L80, 6L90 and 8L90TKO, T56, 4L80, 6L90 and 8L90 transmissions will require tunnel modification to maintain correct drive line angles. Incorrect drive line angles can cause premature wear as well as drive line noise and possible catastrophic failure. Tin Man’s trans tunnel panel will make this much easier while maintaining the factory console. GM A-Body cars include:
| $324.95 | Pedals & Drivetrain Swaps, Transmission Crossmember, Transmission Install Kit | pedals-drivetrain-swaps transmission-crossmember transmission-install-kit hot-products transmission-install conversion-package | |
 | Tin Man 1964-1972 A-Body Transmission Crossmember - T56, 4L60, 4L80, and More | This crossmember fits 1964-1972 GM A-Body coupe and sedan models including Chevrolet Chevelle, Pontiac Tempest and GTO, Buick Skylark. If you’ve got a convertible or El Camino click here. Tin Man’s transmission cross member for the 1964-1972 GM A Body utilize all the factory mount holes. This cross member will virtually bolt any GM transmission into your A-Body chassis. Fits many transmissions, auto and manual! 700R4, 4L60, and 4L65ENo modification is necessary to the transmission tunnel for a simple installation on 700R4, 4L60 and 4L65E transmissions while positioning the engine and transmission for correct driveline angles and best exhaust and firewall/radiator clearance. TKO, T56, 4L80, 6L90 and 8L90TKO, T56, 4L80, 6L90 and 8L90 transmissions will require tunnel modification to maintain correct drive line angles. Incorrect drive line angles can cause premature wear as well as drive line noise and possible catastrophic failure. Tin Man’s trans tunnel panel will make this much easier while maintaining the factory console. GM A-Body cars include:
| $324.95 | Pedals & Drivetrain Swaps, Transmission Crossmember, Transmission Install Kit | pedals-drivetrain-swaps transmission-crossmember transmission-install-kit hot-products transmission-install conversion-package | |
| Tin Man 1966-1972 A-Body Transmission Crossmember - Convertible and El Camino | This crossmember fits 1966-1972 GM A-Body Convertible and El Camino models only. Convertible models include Chevrolet Chevelle, Pontiac Tempest and GTO, Buick Skylark. Tin Man’s transmission cross member for the 1964-1972 GM A Body utilize all the factory mount holes. This cross member will virtually bolt any GM transmission into your A-Body chassis. Fits many transmissions, auto and manual! 700R4, 4L60, and 4L65ENo modification is necessary to the transmission tunnel for a simple installation on 700R4, 4L60 and 4L65E transmissions while positioning the engine and transmission for correct driveline angles and best exhaust and firewall/radiator clearance. TKO, T56, 4L80, 6L90 and 8L90TKO, T56, 4L80, 6L90 and 8L90 transmissions will require tunnel modification to maintain correct drive line angles. Incorrect drive line angles can cause premature wear as well as drive line noise and possible catastrophic failure. Tin Man’s trans tunnel panel will make this much easier while maintaining the factory console. GM A-Body cars include:
| $324.95 | Pedals & Drivetrain Swaps, Transmission Crossmember, Transmission Install Kit | pedals-drivetrain-swaps transmission-crossmember transmission-install-kit hot-products transmission-install conversion-package | |
 | Tinman Fabrication Transmission Tunnel Patch for '64-'72 GM A-Body | Do you need to modify your trans tunnel on your 64-72 GM A Body to make room for a T56, TR6060, TKO, 4L80, 6L90 and 8L90 transmission? Tin man Fabrication just made it easier! We have done the hard work for you. Tin Man Fabrication is now manufacturing this trans tunnel panel to specifically fit ’64–’72 GM A-bodies. This is not a generic universal piece like our competitors, Tin Man Fabrication designed this transmission panel to be as compact as possible to allow the use of the stock consoles. Watch Tin man’s how-to videos below that cover general steps and tips to help you make the installation as smooth as possible. Note: oversize shipping charges may apply; please contact us with any questions prior to ordering. | $174.95 | Pedals & Drivetrain Swaps, Transmission Tunnel | pedals-drivetrain-swaps transmission-tunnel hot-products transmission-install | |
 | Ultimate Headers 1964-1967 GM A-Body LS Swap Headers | Note: Ultimate Headers are built to order and wait time is approx.. 5-6 months to deliver.Our LS Swap headers for ’64 – ’67 GM A-Body cars (Chevy Chevelle, Pontiac Tempest and GTO, and others) give you beautiful stainless steel, long tube, high flow exhaust and fit great. This part number is for the “as cast” finish which looks great. We separately offer satin and polished finishes, as well as silver or black ceramic coating. Features:
| $1,195.00 | Headers, LS and LT Swap Components, Pedals & Drivetrain Swaps | exhaust-header ls-lt-swap pedals-drivetrain-swaps exhaust hot-products | |
 | UMI Performance A- and G-Body Rear Upper Control Arm Axle Bushings | UMI’s high durometer polyurethane bushings replace the factory rubber rear end housing bushings. After many years of weather and abuse the factory rubber bushings tend to dry rot, crack and harden which can lead to decreased ride quality and performance. The UMI polyurethane bushings replace the two upper control arm rear end differential bushings – the bushings that stay attached to the rear end “ears”. New rear end housing bushings are an excellent upgrade for your street driven or track used vehicle. Kit includes two bushings and two washers, the included polyurethane washers prevent the bushings from walking side to side. Made in the USA. | $49.99 | Rear Control Arms | rear-control-arms suspension |