Kore3 GM Tall Spindle Front Hubs 5 x 4.75″ Pair

Description

Kore3 GM Tall Spindle Front Hubs with 5 x 4.75″ Bolt Circle, Pair.  Billet 7075 aluminum hub, billet aluminum dust cap, M12x1.5 ARP Studs, Timken Bearings and Races.  Fits GM B-Body ’77 – ’96 including Chevy Impala, Chevy Caprice, Buick Roadmaster, Oldsmobile Delta 88, and Cadillac Fleetwood.

This KORE3 billet race hub kit was designed for GM tall-spindle and GMF3 spindle applications with the larger .844″ outer bearing journal diameter. Please refer to the GM Big-Brake Application Chart for vehicle compatability and application specific notes. KORE3 hubs are a clean, strong, lightweight solution for anybody wanting to run slip-on rotors on their GM tall-spindle equipped car. Hubs were designed to complement KORE3 big-brake kits. Notes:
Hub kit is provided with ARP wheel studs, bearings, and seals based on what is selected from the pull down menu below. Wheel studs options are 1/2″-20 screw-in ARP Wheel Studs or M12-1.5 press-in ARPwheel studs. Press-in studs are installed by KORE3 while screw-in studs are shipped loose. Billet Grease Caps are included as standard.

KORE3 billet hubs decrease track width .03″ [.8 mm] per side over stock applications, making the overall track width .06″ [1.6 mm] narrower than stock.

All GM tall-spindles with SET6 inner wheel bearings are compatible with KORE3 tall-spindle big-brake conversion hub and bracket kits. GM made two primary versions of the tall-spindle (non-ABS), Ø11″ and Ø12″, as they are typically described by the nominal diameter of the brake rotor that originally fit each respective spindle. Thus, GM Ø11″ and Ø12″ tall-spindles are virtually the same spindle, just with slightly different cast caliper mounts to accomodate different size rotors. Again, the Ø11″ and Ø12″ dimensions denote the nominal rotor diameter, not the spindle itself. Since the cast caliper mounts must be removed (cut) from the spindles for installation of the KORE3 big-brake caliper bracket kit and C5/C6 components, either tall-spindle is equally suitable.

Note: GM tall-spindles came in two variations with respect to the outer wheel bearing size. The outer wheel bearing journal diameter of the spindle may be either Ø.750″ [Ø19.05 mm] or Ø.844″ [Ø21.44 mm], and these hubs are only compatible with the .844″ variants.

The following items are included in this kit:

• Installation instructions
• (2) KORE3 Billet Hubs: GM Tall-Spindle
• CNC machined 70751-T6511 billet aluminum
• Dual 5 x 4-3/4″ wheel patterns
• 3.03 lb [1.37 kg] each
• Anodized black

(1) Hardware kit
(10) 1/2″-20 Screw-In ARP Wheel Studs
OR (10) M12x1.5 Press-In ARP Wheel Studs
(2) Timken SET6 Inner Wheel Bearings
(2) Timken SET3 Outer Wheel Bearings
(2) Inner Oil Seals
(2) Billet Aluminum Grease Caps & O-Rings

Note: KORE3 GMTS HD hubs have provisions for the installation of 1991-1996 OE B/D-Body ABS tone rings. Installer is responsible for removing tone rings from OE rotors and reinstalling them onto the billet hubs.  Tone rings not included.

Installation instructions