- Display 15 Products per page
Magnum XL
| Image | Name | Summary | Price | Buy |
|---|---|---|---|---|
 | Bowler 10" Kickback Billet Shift Lever - "The Razor" Black Anodized with Machined Edges | This shifter was created and designed for the Tremec customer. Now you have the option to upgrade your interior with this sleek shift lever and knob. Combine this lever with one of our bezels and knobs for the complete package, and the perfect fit for your Tremec transmission. Also fits the LGT 700. Features:
Dimensions and Options:
| $103.40 | |
 | Bowler 10" Kickback Billet Shift Lever - Black Anodized | This shifter was created and designed for the Tremec customer. Now you have the option to upgrade your interior with this sleek shift lever and knob. Combine this lever with one of our bezels and knobs for the complete package, and the perfect fit for your Tremec transmission. Also fits the LGT 700. Features:
Dimensions and Options:
| $103.40 | |
 | Bowler 10" Kickback Billet Shift Lever - Raw Machined | This shifter was created and designed for the Tremec customer. Now you have the option to upgrade your interior with this sleek shift lever and knob. Combine this lever with one of our bezels and knobs for the complete package, and the perfect fit for your Tremec transmission. Also fits the LGT 700. Features:
Dimensions and Options:
| $103.40 | |
 | Bowler 8" Kickback Billet Shift Lever - Black | The perfect fit for your Tremec transmission. This shifter was created and designed for the Tremec customer. Now you have the option to upgrade your interior with this sleek shift lever and knob. Also fits the LGT 700. Features:
Dimensions and Options
| $103.40 | |
 | Bowler 8" Kickback Billet Shift Lever - Raw Machined | The perfect fit for your Tremec transmission. This shifter was created and designed for the Tremec customer. Now you have the option to upgrade your interior with this sleek shift lever and knob. Also fits the LGT 700. Features:
Dimensions and Options
| $103.40 | |
 | Bowler T56 Magnum All-in-One Harness with Reverse Lockout | For T56 Magnum, Magnum XL, & Mustang GT500 TR6060Other versions available:
The T56, T56 Magnum, and TR6060 transmissions come equipped with 3 electronic connections that control the vehicle speedometer output, reverse lock out, and reverse lights. If you are using the T56 Magnum in conjunction with a GM connect and cruise package or utilizing an electronic speedometer from companies such as: Classic Instruments, Auto Meter, or Dakota Digital you will will be able to program the outputs to the needed pulse count as well as control the parameters of the reverse lock out all from the Bluetooth enabled smart phone app. The All-in-One harness solution for the T56 transmission comes equipped with all the connections pre-wired into one harness for a simple installation and ease of use. The small epoxy sealed controller is mounted to the VSS output using the existing bolt, and once the unit is powered up you will be able to connect via Bluetooth to your Apple or Android smartphone using our free app. The app will give you the ability to customize the input and output settings for each feature to ensure proper operation in your vehicle. The All-in-One harness eliminates the need for any additional equipment to operate the reverse lock out or generate the correct speedometer signals coming from your T56. This All-in-One harness solution is the perfect finishing touch for any T56 conversion, and the only harness you will ever need. Prior to the development of the All-in-One harness you would need up to 5 separate parts to perform all the same functions wrapped up in this one harness solution. Getting the correct speed sensor output and operating the reverse lock out are typically the most frustrating and confusing. The more technology we incorporate into our hot rods these days sometimes requires specific input signals to allow everything to function correctly. There may be scenarios where you are using a speedometer that requires one signal and an ECM that requires a completely different signal. With the 2 speed outputs that are available in the All-in-One harness you can independently control the output of each one further eliminating any need for additional equipment and connections. The reverse lock out on the T56 is another commonly misunderstood feature. The reverse lock out is a solenoid controlled pin, that uses a spring to exert pressure against the shift rail, to help prevent an accidental shift into reverse when going into 5th gear. It doesn’t prohibit reverse engagement, it only makes it difficult to shift into reverse when it is not getting a power signal. Once power is applied, the solenoid pulls the pin back allowing reverse engagement with minimal effort. The OE’s control this feature using a speed setting to dictate when the pin is pulled rather than a momentary on/off signal. We’ve incorporated that same speed setting feature into the All-in-One harness to give you better control over when the lock out is triggered. The T56 All-in-One Harness utilizes a small, built in, epoxy sealed box that will control each of the 3 functions with power and grounding for each function through a switched +12v circuit and a wire connected to the negative battery post or engine block. Control of the reverse lockout solenoid is based on a user defined speed setting (Default is set at locked above 4 MPH and unlocked at 0-3 MPH) This eliminates the need for a separate lock out control box which is currently the only option to activate the reverse lock out correctly. It is common for most folks to just simply connect their lock out solenoid to a momentary on/off switch such as the brake light switch to activate. This method will get the job done, but can over work the solenoid, and over time shorten its life span. For your electronic speedometer, the harness is equipped with 2 speed sensor outputs; the speed sensor outputs generate a square wave signal that goes from about -5 to roughly +5 volts, varying in frequency as the speed changes. But, you say, my ECM input needs a positive only signal. No problem! The output will automatically shift and give you 0 to +10 volts. The 2 speed sensor outputs are completely independent and can be calibrated separately with any pulse count and ratio you want. So, these two outputs should pretty much be able to drive any common speedometer, cruise control, or ECM. This will give you much greater flexibility in the components you are able to use and requires less time wiring everything up. The reverse lights are powered by a single output wire connected to the positive side of your reverse lights; grounding of those lights should be local to the bulb socket. There is no easier solution for setting up your T56 transmission! T56 Reverse Lock Out Module Vehicle Speed Sensor with Dual Output, pre-set as GM 40 pulse output on one and 16 pulse output on the other. This function can be adjusted with your iOS or Android device. Includes wiring for reverse lights, reverse lock-out and vehicle speed sensor. | $325.60 | |
 | Driveline Components Quick Ratio T56 Shifter 2 Inch Left, 4.25 Inch Back | This shifter offers a very direct feel and short throws. It fits the the ’98-’02 LS T56, ’04-’06 GTO T56, and Magnum F transmissions and puts the shifter where the factory shifter goes in the following vehicles:
With Magnum XL transmission only, this also fits ’60-’64 Ford Galaxy. The shifter moves the shift lever towards the driver by 2″ and back by 4.25″. Note: Front socket kit is required to install this shifter – click here.Shift lever not included. This uses a common two-bolt mount, with 7/8″ spacing between the bolts. Shifter shown in photo is very similar; this product listing has more offset towards the driver.
| $360.00 | |
 | Lakewood T56 Bellhousing for LS and Gen V LT | Connects GM LS and LT Engines to Transmissions Utilizing the Standard GM T-56 and Magnum Pattern
This Lakewood cast aluminum bellhousing connects GM LS and Gen V LT engines to transmissions utilizing the standard GM pattern T-56 and T-56 Magnum. The bellhousing is intended for both GM cars and trucks and other various swap applications. They are a lightweight cast aluminum design much like the original equipment bells (work with OE starters, flywheels, etc.) and use a factory-like attachment to stock or Holley oil pans. These bellhousings are designed to be used with hydraulic release bearings only. We suggest the Hays #82-120 or Holley #319-100, but also carry the Holley #319-575 clutch installation kit that has everything you need: release bearing, clutch, flywheel, bolt kits, pilot bearing, and alignment tool. For additional protection of your clutch and flywheel and to properly align your starter, check out Quicktime Block Plate #RM-6007. *Fits all LS engines except LS4.
Features:
| Original price was: $367.00.$329.95Current price is: $329.95. | |
 | Timken T56 Magnum Tail Housing Seal | Timken seal for the T56 Magnum tail housing. This is where the driveshaft inserts into the transmission. Also fits T5 transmission with 27 spline output shaft. This part # interchanges with National, SKF, and other brands. The actual seal we ship will be one of these brands. This interchanges with Tremec part # 1300-044-019. Dimensions:
| Original price was: $17.38.$14.99Current price is: $14.99. |