T56 & TR6060 transmissions are big! When retrofitting a T56 Magnum or T56 from a ’98 – ’02 F-Body (Camaro, Firebird, Trans Am) into a ’78 – ’88 GM A/G-Body the transmission tunnel is too small to fit the transmission when it is installed at the proper driveline angle. The kit includes a floor cut template and patch panel with the shifter hole pre-cut for and easier installation.
This patch is designed for using the front mount shifter on either the T56 Magnum or TR6060. It is not for using the semi-remote shifter from the TR6060. This piece can be modified for use with the T56 middle or rear-most shifter location but if you’re using one of those shifter locations we suggest Hurst 69510000 instead.
See our TR6060 FAQ for more information on shifter locations.
This tunnel patch includes two sheet metal pieces that are pre-rolled and tapered to fit the cut made with the included template. As designed, it is pre-drilled to be retained with sheetmetal screws. Alternatively, you can welded in place.
- Raw Steel Finish
- Modifications will be required
- Hurst Quality
- Made in the USA