4L60

Models: Malibu, Monte Carlo, El Camino, Cutlass, Grand Prix, Regal

Fits the following transmissions: 700R4, 4L60, 4L60E, Tremec TKX, TKO-500, TKO-600.

Newly designed and manufactured by G Force Performance to be lighter weight for improved performance and still maintain the same quality as the original RCG-700 Crossmember.

Finished in a black powder coat. Includes new mounting hardware. Purchase transmission mount separately.

Notes:

• On some installations, it is necessary to remove the catalytic converter heat shield from the passenger side floor pan.
• This generation of vehicle is prone to body bushing compression, even with some southern vehicles. If the floor pan is too close to allow installation, it may be necessary to replace the body bushings. Some customers have reported that with slight interference instances, they have been able to gently lift the floor pan with the assist of a floor jack and a wood cushion, thus providing the required clearance for installation.
• The crossmember is installed so that the exhaust clearance humps are closed on the top and open on the bottom.

Fits the following GM transmissions : 700R4 , 4L60 , 4L60E , Tremec TKO-500, TKO-600, and GM T-5.

Model: Camaro, Firebird , Trans Am, Formula 400: Also 1968-1974 Nova, Omega, Ventura

Finished in a durable black-satin powdercoat paint. Includes new high-strength, Grade#8 mounting hardware. Purchase transmission mount separately. A polyurethane transmission mount is recommended.

( Note : The distance between the crossmember frame mounting holes is approximately 30-3/8″ inches. Be sure to measure your frame First , to insure proper selection.)

Installation notes:

This crossmember is installed with the GForce label facing the REAR of the vehicle. A second determining feature is the crossmember center tube section has a 1/2″ in. drain hole located on the BOTTOM and should be on the PASSENGER side next to the exhaust hump weldment.
The crossmember is installed so that the exhaust humps are towards the floor of car and open to bottom. The Exhaust runs under the crossmember.
To utilize the new provided 7/16″ in. mounting hardware, it is necessary to enlarge the OEM holes in the frame. If installer chooses to utilize the stock size 3/8″ in. hardware, it is STRONGLY recommended that installer obtains Grade#8 high-strength fasteners & washers to compensate.

Fits:

• • 1967 Chevy Camaro
  • 1968 Chevy Camaro
  • 1969 Chevy Camaro
  • 1967 Pontiac Firebird
  • 1968 Pontiac Firebird
  • 1969 Pontiac Firebird
  • 1968 Chevy Nova
  • 1968 Pontiac LeMans, Tempest, GTO,Ventura
  • 1969 Chevy Nova
  • 1969 Pontiac LeMans, Tempest, GTO,Ventura
  • 1970 Chevy Nova
  • 1970 Pontiac LeMans, Tempest, GTO,Ventura
  • 1971 Chevy Nova
  • 1971 Pontiac LeMans, Tempest, GTO,Ventura
  • 1972 Chevy Nova
  • 1972 Pontiac LeMans, Tempest, GTO,Ventura
  • 1973 Chevy Nova
  • 1973 Pontiac LeMans, Tempest, GTO,Ventura
  • 1974 Chevy Nova
  • 1974 Pontiac LeMans, Tempest, GTO,Ventura

Models: Malibu, Monte Carlo, El Camino, Cutlass, Grand Prix, Regal

Fits the following transmissions: 700R4, 4L60, 4L60E, TKO-500, TKO-600.

Finished in a black powder coat. Includes new mounting hardware. Purchase transmission mount separately.

Notes:

• On some installations, it is necessary to remove the catalytic converter heat shield from the passenger side floor pan.
• This generation of vehicle is prone to body bushing compression, even with some southern vehicles. If the floor pan is too close to allow installation, it may be necessary to replace the body bushings. Some customers have reported that with slight interference instances, they have been able to gently lift the floor pan with the assist of a floor jack and a wood cushion, thus providing the required clearance for installation.
• The crossmember is installed so that the exhaust clearance humps are closed on the top and open on the bottom.

This transmission crossmember will directly bolt a GM 700R4, 4L60E, or 4L65E four speed automatic transmission into your Fox Body Mustang. Comes with mounting hardware and polyurethane transmission mount (not pictured).

Fox Body cars include:

• 1979 – 1993 Ford Mustang
• 1979 – 1993 Mercury Capri