Pegasus Auto Racing Supplies

This banjo bolt fits most standard 3AN and 4AN to 3/8″/10mm banjo fittings and banjo adapters measuring approximately 1/2″ (12mm) thick.

Plated mild steel construction is suitable for brake systems.

Sold individually. copper crush washers sold separately – click here.

Our silicone hose is built for endurance and performance in custom coolant and intake plumbing applications. Each hose is hand-crafted from multiple layers of silicone rubber with polyester reinforcing fabric between the layers. The silicone rubber remains flexible and tough from -50° C to +180° C (-58° F to 356° F).

This Stealth Black 90 degree elbow has a 3/4″ ID with a smooth, shiny “wipe-down” finish. The legs measure at least 4 inches long (measured from the centerline of the opposite leg). The 3-ply reinforcement results in a working pressure rating in excess of 65 psi and a 4.5mm wall thickness (28mm / 1 1/8″ OD). Use our Hose Joiners (HJ19) and our Lined Hose Clamps (Part No. 3613-1.75) to construct the exact shapes you need.

Note: This hose is NOT formulated for use in oil or fuel plumbing applications. It will handle an air-fuel mixture and will survive occasional spills and oil leaks, but it will not stand up to continuous exposure to liquid petroleum.

Our silicone hose is built for endurance and performance in custom coolant and intake plumbing applications. Each hose is hand-crafted from multiple layers of silicone rubber with polyester reinforcing fabric between the layers. The silicone rubber remains flexible and tough from -50° C to +180° C (-58° F to 356° F).

This Stealth Black 90 degree elbow has a 5/8″ ID with a smooth, shiny “wipe-down” finish. The legs measure at least 4 inches long (measured from the centerline of the opposite leg). The 3-ply reinforcement results in a working pressure rating in excess of 80 psi and a 4.5mm wall thickness (25mm / 1″ OD). Use our Hose Joiners (HJ16) and our Lined Hose Clamps (Part No. 3613-1.25) to construct the exact shapes you need.

Note: This hose is NOT formulated for use in oil or fuel plumbing applications. It will handle an air-fuel mixture and will survive occasional spills and oil leaks, but it will not stand up to continuous exposure to liquid petroleum.