HP Tuners

This is a brand new product and will begin shipping mid-October 2022.  Orders will be filled on a first-come, first-served basis.

Built for enthusiasts and professionals – Introducing MPVI3 by HP Tuners, the fastest and most sophisticated OBDII interface device to date. Now standard with Pro Feature Set (PROLINK+ cable sold separately).

This SKU includes the hardware only, you will have to purchase tuning credits separately.  We also offer this with two tuning credits included – click here.

Bigger, better, faster!

Pro is the new standard with MPVI3. Take advantage of Pro Feature Set capabilities like standalone data logging and PROLINK+ compatibility (sold separately) already built into your new device. MPVI3 redefines the limits of speed and control with faster standalone data logging and 2X the storage capacity compared to the previous generation. Log more runs (faster) and store more calibrations on your MPVI3, all with the convenience of eliminating your laptop from the equation.

But don’t be fooled, MPVI3 continues the legacy of its predecessor with features like Bluetooth 5.0, an M8 motorsports-grade screw-on connector, RGB LEDs, and USB-C connectivity (4MB/s).

MORE DATA AT YOUR FINGERTIPS WITH PROLINK+

Need to view more data with your MPVI3 from a wideband sensor, boost gauge, or other additional sensors? Get equipped with the PROLINK+ cable (sold separately), enabling users to wire in and record up to 2x analog signals (from a wideband sensor, map sensor, etc.) and 1x CAN bus signal simultaneously. Now standard with Pro Feature Set, MPVI3 is fully compatible with the PROLINK+ cable straight from the box.

*PROLINK+ is not required for MPVI3. The PROLINK+ cable must be wired in for use.

For a complete list of supported vehicles please click here.

Download the VCM Suite – click here.  VCM Suite includes VCM Editor and VCM Scanner.

VCM Editor – your comprehensive vehicle control module calibration software.

Get started by reading your vehicle’s different control modules’ flash memory and save it as an .HPT file. Adjust a multitude of parameters, like spark, fuel, RPM limits, fan temps and speeds, transmission shift points and pressures, exhaust valve control, speedometer settings, and so many more. Then, write all your changes back to the vehicle using your MPVI3.

VCM Scanner – your feature-rich OBDII scanning & diagnostic software.

View, chart, and log all your diagnostic data in real-time via your vehicle’s OBDII diagnostic port–command fans, open/closed loop, gear select, timing, air-fuel ratio, and so much more. Read Diagnostic Trouble Codes (DTCs), experience standalone data logging, and explore a multitude of special functions like Gear/Tire Wizard. Built-in VCM controls are also supported.

This is a new product and will begin shipping September 2022.  Orders are filled on a first-come, first-served basis.

PROLINK+ for MPVI3

Designed specifically for MPVI2+ and MPVI3, the PROLINK+ cable allows professional users to input 2x analog signals (from a wideband sensor, map sensor, boost pressure sensor etc.) and 1x CAN bus signal simultaneously.

PROLINK+ Specifications:

• 2x dedicated 0-5V analog inputs.
• 1x CAN bus input (500kbps).
• 100Hz sampling rate.
• M8 connector to 5 wire harness.
• For MPVI2+ and MPVI3 interfaces.
• MPVI2+ interfaces must purchase Pro Feature Set to be able to use the PROLINK+ cable.
• PROLINK+ for MPVI3 Devices
• Since the latest generation MPVI3 interface is standard with Pro Feature Set, you only need to purchase the PROLINK+ cable to wire in these additional inputs. No other purchase is required.